- This topic has 204 replies, 1 voice, and was last updated 12 years, 7 months ago by
Rabin Manandhar.
-
AuthorPosts
-
Saif to BertCamRoy
GuestHello BertCamRoy,
Sorry I didn’t come here earlier.
U can email me at saif_uta@yahoo.com or u can also reach me at msn ID : NCI_saif@homail.comI hope I can help u. thanx.
SaifALLAN
GuestAnybody wants to help me on my Quintum AXT2400 i’m using loop start reverse battery and supervision is answer and disconnect. when i try to call and it was answer the duration will not start…… pls. help me
voipchuck
GuestHi guys, I am really stucked and I despirately need any assistance.
I have a CMS that needs to route calls to A800. I tried using ISDN connection or direct voip to the CMS, but am not able to get it functional. Really despirate here…
Thanks
Rumel
Guesthi voip Exparts,
can any one tell me how i confugre cisco ATA 186 with sysmaster’s voice master with ivr & with pin authentication.i need both side configuration(ATA 186 + voicemaster).please help me.Meysam
Guesthello guys
i have two as400 Tenor series and need port mapping configuration.
I create 4 channel group in devices and now only port 1 work properly! other handset connected to fxs station has busy tone! help me please. ASAP.best regards
meysamNebras
Guestpls I want any help me to configure quintum A400 to send h323 outgoing calls
with my appreciationJerry
GuestHello,,
Good day!!!
Is there anyone who can help me in my Quintum A800..how to limit the number of rings? and disconnect the call,if not answered….thanks a lot..more power to everyone…………
jerryReazur Rahman
Guesthi
i have 3 A800 and using 24 phone line…for 3 A800 i am using 3 IP’s…is there body who can help me how can i use 1 IP for 3 A800?
regardsReaz
Ironchef To Rumel
GuestDid you find answer for your question? I have the same equipment. Maybe we can put together our knowledge to make it work. My email address: cheetsai@comcast.net
Simon
GuestI am using A800
I have a problem after entering account number voice prompt says goodbye.Kenny
GuestI have a Tenor A400, Somebody did some IVR configuration on it, which at the end of the day for one reason or the other it doesn’t work.
But now the IVR configuration has been removed and the Tenor is not Giving dialing tone like it normally do.
Thanksbesitomio – to allan
Guestre: 2400axt
i have solved that problem by upgrading to their latest software. a tech support from the company where i bought my quintum upgraded my axt2400. now, the problem i have is, sometimes, the reverse battery doesn’t work. duration of calls sometimes is 0, even the call connected. anybody can help on this?
tks…
tarrant – to besitomio
GuestAre you still having a problem with reverse battery on your Tenor AX? Please email me at tarrant222@yahoo.com I have a patch that may solve your reverse battery issue.
imnc
GuestIf I use only PSTN trank group in Tenor D800, how to disable PBX trank group
Bilal
Guesti am looking for Tenor A800 config.
using ADSL router 1 extip Tenor box is on static pvt ip.
my tenor box receives trhe call. but drops after 1 bellany solutions
-
AuthorPosts