Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

How to Recover TENOR A800 Lost Password

Viewing 15 posts - 16 through 30 (of 92 total)
1 2 3 … 5 6 7
  • Author
    Posts
  • 4th August 2005 at 02:03 #27359
    Michael – Philippines
    Guest

    May i know what series you have?

    4th August 2005 at 07:33 #27360
    Jeweel
    Guest

    It is AXT 800. In the configuration manager channels are not shown. But the CLI command “debug test o 1-8 v” have succeeded i.e, dialtone is ok. i can call through CLI command but normally it is not working.

    5th August 2005 at 10:33 #27361
    Michael – Philippines
    Guest

    Check your configuration on the channels you activated.
    If you can email me the configuration maybe i can check

    voip_sales@hotmail.com

    16th August 2005 at 10:36 #27362
    Masud
    Guest

    HELP!!!… i’ve lost the password of our Quintum Tenor AXT2400… can ANYBODY help me in BREAKING or RECOVERING the password in my Quintum… ASAP… tnx

    16th August 2005 at 19:08 #27363
    MikeM
    Guest

    You will need to contact Quintum directly to have the password reset.

    18th August 2005 at 00:52 #27364
    Michael – Philippines
    Guest

    Contact quintum tech to fix the issue. I know commands but its not advisable to use because the licensed will be deleted and you cant use anymore the box unless you get the license from them. So Contact Quintum. You need to know the ip address you set to that box for them to remotely dicipher the encrypted password.

    25th August 2005 at 22:36 #27365
    shafiq
    Guest

    I used only mobile route .
    How can i block pstn call by my gateway ?Pls advise me where i config this option.

    Regards
    Shafiq

    27th August 2005 at 07:19 #27366
    Michael – Phillipines
    Guest

    Your A800 work both PSTN and mobile. In activating the Mobile route the Pstn will be deactivate. If you want I can configure your gateway via remote.

    Give me your msn id and lets talk about it

    27th August 2005 at 19:41 #27367
    Hi All
    Guest

    Please contact with me for tenor any kind of problem.

    protocol_systems@hotmail.com

    Thanks.

    Anwar
    CEO
    ProSys

    12th September 2005 at 20:36 #27368
    Shafiqur Rashid Habib
    Guest

    How deactive digital pstn call in
    Tenor A800 ? Please suggust me.

    Regards
    Shafiq

    13th September 2005 at 19:55 #27369
    MikeM
    Guest

    Shafiq,

    Please explain. Do you want to deactivate the PSTN ports on the Tenor? If so, all you need to do is disable all the channels in the pstn trunk group (config pstntg 1# dis 1 a) and submit this down.

    If you just want to stop calls from coming in to the PSTN, and only allow calls to go out to the PSTN, you can change the direction setting in the pstn trunk group to outgoing only. This is found in the config pstntg 1#.

    Mike

    10th October 2005 at 06:22 #27370
    Copotron
    Guest

    Pls anybody help me to config Quintum AXT 800 GW and pin number generation in GW.

    Thnx
    Copotron

    10th October 2005 at 17:12 #27371
    MikeM
    Guest

    Copotron,

    If you would like assistance in configuring the AXT, please contact me at mike_voip@hotmail.com.

    Mike

    11th October 2005 at 10:14 #27372
    chris
    Guest

    help! i’ve lost the password of our quintum axseries.can anybody help me to break the password in my quintum……………. tnx

    11th October 2005 at 13:32 #27373
    MikeM
    Guest

    Cris,

    Unfortunately you will need to contact Quintum directly to have the AX password reset.

  • Author
    Posts
Viewing 15 posts - 16 through 30 (of 92 total)
1 2 3 … 5 6 7
  • The forum ‘Voice over IP’ is closed to new topics and replies.