VoIP bandwidth calculator...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

How to Recover TENOR A800 Lost Password

Viewing 15 posts - 1 through 15 (of 92 total)
1 2 3 … 5 6 7
  • Author
    Posts
  • 17th June 2004 at 01:58 #27344
    koymack
    Guest

    HELP!!!… i’ve lost the password of our Quintum Tenor A800… can ANYBODY help me in BREAKING or RECOVERING the password in my Quintum… ASAP… tnx

    17th June 2004 at 02:27 #27345
    Noname
    Guest

    Had you tried to connect to the console port directly and rebooting the unit???? I think that there is way to reset the unit to factory default, but you will loose the configuration.

    But reprograming a a800 should not be too hard if you could reset it.

    17th June 2004 at 03:00 #27346
    koymack
    Guest

    hi Noname a nd tnx for replying… ive tried rebooting my Quintum while connected to my PC and in Hyperterminal… you can only change the IP, Gateway, etc.. but there’s no option to reset to FACTORY DEFAULT… do you know how?…

    17th June 2004 at 04:32 #27347
    koymack
    Guest

    i think i got it… thanks Noname…

    18th June 2004 at 22:48 #27348
    Noname
    Guest

    Now yout got me curius.

    How did you do it?????

    Noname

    22nd June 2004 at 09:37 #27349
    koymack
    Guest

    bypassed the boot sequence during boot and did factory restore… lost the config though…

    12th January 2005 at 01:14 #27350
    michael
    Guest

    koymack

    How did you bypass boot sequence?

    please tell me co’z i have a problem also like that.

    michael

    13th January 2005 at 16:26 #27351
    MikeM
    Guest

    In the first generation Tenors (A800, A400, D2400, etc), if you connect a serial cable to the console port and to your PC, then set Hyperterminal as directed in the user guide (38400, None, 8, 1, no flow control), then power the unit off and back on, you will see boot up information come up. When you see “Hit enter within 3 seconds” hit the enter key and this will bring you to the boot screen. You will need to go through all the questions (IP address, default gateway, subnet mask,etc) and the last question will be to restore factory default. You need to answer yes to this and it will erase your entire configuration, including your password, but not your IP address information. This is the only way to recover a lost password in the first generation tenors.

    14th January 2005 at 15:33 #27352
    michael
    Guest

    thanks mikeM…….thank you so much…

    28th May 2005 at 14:41 #27353
    Wahidun nabi
    Guest

    hi
    what is about second generation to break password Axseries 2400
    quintum

    29th May 2005 at 12:22 #27354
    Michael
    Guest

    In the 2nd Gen, Go directly to quintum. I tried that once but the problem is that the license file was deleted.

    31st July 2005 at 23:01 #27355
    Jeweel
    Guest

    I have lost my ASG400 password. Please help me recovering my password. Please…

    1st August 2005 at 19:27 #27356
    MikeM
    Guest

    Jeweel,

    You will need to contact Quintum directly to have the password reset.

    2nd August 2005 at 06:33 #27357
    Jeweel
    Guest

    Thanks Mike

    3rd August 2005 at 20:04 #27358
    Jeweel
    Guest

    i have lost my quintum channels.
    How could i get it back?

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 92 total)
1 2 3 … 5 6 7
  • The forum ‘Voice over IP’ is closed to new topics and replies.