Generic selectors
Exact matches only
Search in title
Search in content

Your opinion about Quintum?

Viewing 15 posts - 151 through 165 (of 287 total)
  • Author
    Posts
  • #23817 Reply
    MikeM
    Guest

    shenavandeh,

    If this is the old A200, then it is not possible to call from port to port within the same unit. This is only allowed on A400/A800 and AS/AX units.

    Mike

    #23818 Reply
    Jaime
    Guest

    I have two tenor as seies 200.
    I will like to configure them lan to lan, analog phones to connect over a wireless 2.4 GHz link
    Can you tell me the step by step how to do these.
    Thank You

    #23819 Reply
    shenavandeh
    Guest

    OK .. I changed my Tenor to A800
    now .. how is it possible to assign a
    specific private number to each line of PBX s ?
    for example if i Peek up my phone connected to Line 1 of my PBX abd dial 1002 , my PBX line on port 2 rings ?

    #23820 Reply
    Medum
    Guest

    Can anyone help me for a configuration og Quintum A400 and SIP behind NAT

    #23821 Reply
    VoIP Devil
    Guest

    : Is there any scripting tool or procedure to add dial-peers on Cisco, either to modify or to add?

    Eg: I have 10 Ciscos – and need to add 5 similar dial peers on all the Cisco.

    How can I load into all of them without having to add one by one individually.

    Thanks
    VoIP Devil – goldeneye6954@hotmail.com

    #23822 Reply
    shenavandeh
    Guest

    VoIP Devil ,

    edit your configurations in a text file .. then copy past them all to your configuration terminals
    😉

    #23823 Reply
    VoIP Devil to Shenavandeh
    Guest

    Lol – yeah thanks for the tip, but I would like to know something I dont know….

    Anyway here’s a tip for you – there is a software called the automater. You can do scripts and load it to ciscos you have.

    #23824 Reply
    Earl
    Guest

    My ASM400 is not disconnecting in coming PSTN call after they hangup.

    I attempting to use Asterisk as the SIP server.

    I have tried silence based diconnect with not success.

    My pSTN uses Tone based disconnection.

    #23825 Reply
    Shani
    Guest

    Hi Friends,

    I have a quintum AX series, I need to allow access to it from certain ips while rest be blocked. can anyone tell me how to do it, Please if you can email me at s4shani83@hotmail.com

    #23826 Reply
    RK
    Guest

    I have Tenor Ax
    I connect it to PSTN with 4 Isdn lines Actually (4 x 2) it mean 8 telephone lines.
    the problem is that I get errors 19
    and 41 and actually I have 5% of dialed numbers any one can help me
    to make my lines work normall with the tenor

    #23827 Reply
    Bathan
    Guest

    Hi.. i recently got 2 AS200 and im really new at this VoIP stuff.

    I’ve downloaded lots of pdfs but im having trouble conecting form one box to another.

    I have successfuly conected to the quintum answering machine but i having trouble conecting them to each other…

    any help will be appreciated.

    mbanzas@solucionrh.net

    THANKS!

    #23828 Reply
    Wahidun nabi
    Guest

    hi
    i am clipton , i am going to set up a voip call centre , i want to know how to oconfigure configure step by step TenorAX Series for 24 port
    thanks

    #23829 Reply
    Intouch
    Guest

    To All,

    Please can any one help retrieve AX Tenor 2400 password through console. Ihave changed the default password to new password and i forgot….know iam unable to go beyound login and password promt.

    plz help how to reset password.

    #23830 Reply
    MikeM
    Guest

    Intouch,

    Unfortunately, with the AS/AX/DX units you must contact Quintum to have them provide you with a one time access password. You will need to talk to them as the password is time sensitive.

    Mike

    #23831 Reply
    simo
    Guest

    Hardware Description of
    The Quintum Tenor ASM400
    and AXM800
    please.

Viewing 15 posts - 151 through 165 (of 287 total)
Reply To: Your opinion about Quintum?
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">