- This topic has 252 replies, 1 voice, and was last updated 8 years, 10 months ago by DangerousMinds.
26th June 2006 at 06:16 #35371pidsGuest
does anyone knows about the questions ask during interviews for bts reparenting related position?
i need your help.
thanks!26th June 2006 at 08:41 #35372SezerGuest
I want to know about ET port numbering for BTS, BSC,TRAU and MSC in Nokia 2g Network.
I have 1 MSC and 6 BSC, 15 TSCM2e
and 250 BTS.
16 KB mapping will use Ater mapping (FR)
Regards7th July 2006 at 11:05 #35373Ridwan RoniGuest
can help me?.can config 3+3+3+3 in 1 cabinet for nokia ultrasite,how?28th September 2006 at 14:04 #35374EjazGuest
in m very new in telecom field.now a days in m doing job as a bbs engineer.if any body can told me what are the main question asked form a bss engineer and how can i get the inforamtion about the bss engineer.
Hoping to be favored.
Thanks28th September 2006 at 23:39 #35375PixGuest
As a BSS engineer, you have two main field: radio and equipments. first you have to know on which side you are.
if Radio : buy a typical telecom book and study fundamentals of GSM. Radio is about the same in any constructor.
if equipment : you need to get documentations about the equipment you’re supposed to take care of. It is dependant on the vendor (ericsson ? nokia ? alcatel ? motorola ?) and depndant on the system (BTS ? BSC ? TC ? Abis ?)
If you’re new and someone hired you to do these tasks, you need trainings. Ask your employer to purchase trainings from your telecom vendor…29th September 2006 at 05:50 #35376akbarGuest
how to work in manual search in gsm network.2nd October 2006 at 01:52 #35377PieterGuest
Will you please help with steps in commissiong an Alcatel BSC extension (config 4 to config 6)2nd October 2006 at 22:42 #35378PixGuest
I recommend you contact your regional alcatel TAC support in order to perform this operation. They will not allow you to do this operation by yourself if you don’t know how to do it !!3rd October 2006 at 11:02 #35379VINOTH KUMArGuest
I want to know maore details on FIU& RRI card. how it is working.Is there an site or books relating this. please help me4th October 2006 at 07:06 #35380AkbarGuest
how to work in manual search,
which parameter is needed to manual search .
can you help any one .9th November 2006 at 05:55 #35381A. CasmanaGuest
I need new software MSm / MNM minilink ericson, which i have after installed be error, why?23rd November 2006 at 05:33 #35382pankajGuest
Can anyone provide me information on the traffic calculation on the ater in erlangs16th December 2006 at 19:46 #35383N.C.MODIGuest
WHAT IS THE EFFECT OF WRONG BSIC. I MEAN SAME BSIC FOR TWO NEAR BY B.T.S HAVING SAME BCCH18th December 2006 at 09:30 #35384TomarGuest
In case, that you have same combination BCCH/BSIC on two sector neat to each other, on the some other (at least one) sector there will be a lot of HO failure.
For example: you have sector A and B with same BCCH/BSIC combination. This two sector are not neighbouring sectors. You have sector C. Sector C is in the direction to the sectors A and B.
On sector C is defined HO to the sector A, but not defined HO to sector B. Mobile is served by cell B. On the border between cell B and C mobile measure and report BCCH/BSIC of the cell A (which is defined as a neighbour).
In the statistic there is a lot of HO failure from cell C to the A.23rd May 2007 at 15:04 #35385angel potterGuest
i want to know about DXU-23 .there are two E1 PORTS are available.only RJ-45 connector is compatible on this port.pcm cable has 2 port on one side & one port is on other side.which port will be connect on DXU-23 IF THERE IS ONLY ONE E1 IS AVAILABLE FOR THE SITE.