Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BSS

  • This topic has 252 replies, 1 voice, and was last updated 12 years ago by DangerousMinds.
Viewing 15 posts - 16 through 30 (of 253 total)
  • Author
    Posts
  • #35176
    Mostafa
    Guest

    Hendy:

    can u tell me exactly what do u need to know about 2202?

    #35177
    imanudin
    Guest

    Anybody knows what’s the meaning of these : LAC Boundaries, SDCCH overhead, Inter BSC handover and signalling, inter MSC handover and signalling, BTS and BSC Reparenting, Transmission E1 Routers, Pooled and dedicated transcoders as well as PCU allocation.

    And how to do it in MSC/BSC ?

    #35178
    sunilkumar
    Guest

    Hi abt POOLED TRANSACODER.

    As per Ericsson BSC…

    The transacoder is a separate unit.It has its own SOFTWARE and PROCESSOR ( Regional ) for the resource management.

    It will be connectd to the Group Switching SYSTEM.Lets say..like…

    AINTERFACE E1/PCMS—->GSS

    #35179
    hendi
    Guest

    hiii mostafa,
    i need to know about the hardware in rbs 2202 (CDU,DXU,TRU,ECU,PSU)and how this hardware working, and if u have this article please sent on my e-mail hendi_kurnia@yahoo.com

    #35180
    vivek
    Guest

    Hello
    I’m a newly joined BSS engg and seeing the site i came to know u all are really good professionals .Pls help me find info abt RBS2202 and MINILINK . I’m really confused abt some basic concepts abt them .Hope u’ll help me out .
    My id id vivek_p@email.com
    Thanks

    #35181
    sonam
    Guest

    hi,
    i would like to know about the common fault and the most severe fault that occurs in the RBS2202 of Ericsson.Since the location of the installed RBS is always rainy and the lighthing strikes all on a sudden,i would like to know if there are anychances for equipment to damage and its necessary precaution in order to prevent the equipment from the lightning.

    #35182
    Dumisani
    Guest

    I need to know about the hardware in rbs 2202 (CDU,DXU,TRU,ECU,PSU)and how this hardware working, and if u have this article please sent on my e-mail du@tsamail.co.za

    #35183
    Baba Hajiya
    Guest

    Hi Engineers,

    can someone help me out on details of sites reparenting (cutover) in ericsson systems.

    #35184
    Baba Hajiya
    Guest

    Hi Engineers,

    can someone help me out on details of sites reparenting (cutover) in ericsson systems.

    #35185
    nuralhassan
    Guest

    can any tell me how we will do rbs commissioning

    #35186
    Mostafa
    Guest

    Hi nuralhassan,

    1- Check VSWR for feeders.
    2-Load OMT in the DXC
    (OMT= Nbre of sectors + Nbre of TRXs + Nbreof cabinets +Type of RBS + Type of combiner + external alarms)
    3-Configure transmission in DXC (if installed in RBS)=Nbre of TSs for the site.
    4-Do drive tests when the site is up.

    #35187
    nam vo hoang
    Guest

    Hi All
    Please tell me the way to connect to a remote Minilink network by using a modem with the phone line

    #35188
    sachin mahajan
    Guest

    hi all
    i want to know about the hardware and working of rbs 2202,minilink

    my emailid is
    electronsach@rediffmail.com
    regards
    sachin

    #35189
    emre igrek
    Guest

    hello i want detailed documents for rbs 2206 and 3g supported rbs versions

    turkey

    #35190
    emre igrek
    Guest
Viewing 15 posts - 16 through 30 (of 253 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.