- This topic is empty.
-
Posts
-
I HAVE INFORMATION ABOUT TEMS AND ANATHER MATERIAL IS NEED
hi
please tell me the commands to be used in bsc to chk EDAP,TRXSIG,OMUSIG & TCHWhat issues can cause following alarm on Nokia Ultra Site? – Traffic channel activation failure
Thanks in advance.
PCMs or Phase Change Materials are used in B. T. Shelters in a few diferent ways. They can be encapsulated in Aluminum or Polymer Profiles. Compact or
Wall-hanging models are available. It is called Advanced Thermal Management system. The matter is sumarrised as under:
1. Back-up to air conditioning in case of power failure.
2. Free cooling with-out air conditioning and maintaining the Shelter temperature at less than 35C or 40C etc.
3. Latest-PCM is offering trials for PCM based back-up for eliminating diesel generator in case of power failure. You will find a write up on PCMs for BTS (B. t. Shelter) at pcmenergy.com
4. In India PCMs are extensively used in Airtel (Bharti) shelters. Tatas are in a trial stage and Reliance may follow the suit.hi all of u! everybody is always talking about GSM stuff. No one working on CDMA?
Hi guys can somebody help me out with GLCK calibration in motorola Horizon 2 macro.
hi,to all of u? we use the IF Cable in installation.what frequency range of this IF cable,or it is constant,it is fixed for all operators or differenet?
Hi all
I am new to alcatel BTSs can any one share their views abt it.Thank you
Bran the commands of NOKIA Bsc are
for:
EDAP : ZESI;
TRXSIG : ZDTI:::PCM=”ET”;
OMU can also be checked from the above command
and for Tch u can check from
ZERO:BTS or BCF No=” “;shaleen
HUGHES
hssworld.comHi Ashwini
I’m radio engineer on Alcatel BSS, planning and optimization.Hi Pix
Do u hav knowledge abt Alcatel 9100, MFS 9125
Also Can u explain to me how the call is flow in case of the BTS w.r.t to TRE and antennaAwaiting ur reply
I have some questions regarding NOKIA BTS?
1. Each trx power with and without combiner?
2.What is BCF and OMU and its functions,hi ravindra
the trans. power is 44 Dbm with combiner and 47 dbm without combiner
and
the bcf is terminology which represents the different BTS or sectorthe OMU signalling is responsible for carrying the alarms
its main important function is to initialize the BTS and configure it.another important function of OMU sig is that it keep on interacting with the hardware of BTS and ckeck there status
can u plz tell me abt call routing in BTS and Bsc
Halo ALL…
My name is MOAN, I use to work with installing RF for Indoor Coverage, Integrate BTS and Commisioning BTS ULTRASITE and METROSITE. I can Upgrade, Downgrade and Activate BIAS-T for NOKIA ULTRASITE BTS.
I try to look for a new job for Installation BTS for NOKIA Product, because my old company is close.
Thank’s.Ps. For everyone hwo get trouble with Alarm 7604 Rx level divert to much……, just ask the OMC to reset the OMU. I hope it can clear the Alarm
