- This topic has 204 replies, 1 voice, and was last updated 16 years, 3 months ago by Rabin Manandhar.
-
AuthorPosts
-
21st August 2004 at 19:22 #23090Saif to BertCamRoyGuest
Hello BertCamRoy,
Sorry I didn’t come here earlier.
U can email me at saif_uta@yahoo.com or u can also reach me at msn ID : NCI_saif@homail.comI hope I can help u. thanx.
Saif26th August 2004 at 08:10 #23091ALLANGuestAnybody wants to help me on my Quintum AXT2400 i’m using loop start reverse battery and supervision is answer and disconnect. when i try to call and it was answer the duration will not start…… pls. help me
26th August 2004 at 19:17 #23092voipchuckGuestHi guys, I am really stucked and I despirately need any assistance.
I have a CMS that needs to route calls to A800. I tried using ISDN connection or direct voip to the CMS, but am not able to get it functional. Really despirate here…
Thanks
1st September 2004 at 06:13 #23093RumelGuesthi voip Exparts,
can any one tell me how i confugre cisco ATA 186 with sysmaster’s voice master with ivr & with pin authentication.i need both side configuration(ATA 186 + voicemaster).please help me.12th September 2004 at 10:22 #23094MeysamGuesthello guys
i have two as400 Tenor series and need port mapping configuration.
I create 4 channel group in devices and now only port 1 work properly! other handset connected to fxs station has busy tone! help me please. ASAP.best regards
meysam12th September 2004 at 16:03 #23095NebrasGuestpls I want any help me to configure quintum A400 to send h323 outgoing calls
with my appreciation16th September 2004 at 07:31 #23096JerryGuestHello,,
Good day!!!
Is there anyone who can help me in my Quintum A800..how to limit the number of rings? and disconnect the call,if not answered….thanks a lot..more power to everyone…………
jerry20th September 2004 at 06:18 #23097Reazur RahmanGuesthi
i have 3 A800 and using 24 phone line…for 3 A800 i am using 3 IP’s…is there body who can help me how can i use 1 IP for 3 A800?
regardsReaz
20th September 2004 at 23:20 #23098Ironchef To RumelGuestDid you find answer for your question? I have the same equipment. Maybe we can put together our knowledge to make it work. My email address: cheetsai@comcast.net
22nd September 2004 at 07:57 #23099SimonGuestI am using A800
I have a problem after entering account number voice prompt says goodbye.26th September 2004 at 02:29 #23100KennyGuestI have a Tenor A400, Somebody did some IVR configuration on it, which at the end of the day for one reason or the other it doesn’t work.
But now the IVR configuration has been removed and the Tenor is not Giving dialing tone like it normally do.
Thanks2nd October 2004 at 09:07 #23101besitomio – to allanGuestre: 2400axt
i have solved that problem by upgrading to their latest software. a tech support from the company where i bought my quintum upgraded my axt2400. now, the problem i have is, sometimes, the reverse battery doesn’t work. duration of calls sometimes is 0, even the call connected. anybody can help on this?
tks…
19th October 2004 at 15:44 #23102tarrant – to besitomioGuestAre you still having a problem with reverse battery on your Tenor AX? Please email me at tarrant222@yahoo.com I have a patch that may solve your reverse battery issue.
22nd October 2004 at 13:15 #23103imncGuestIf I use only PSTN trank group in Tenor D800, how to disable PBX trank group
26th October 2004 at 15:33 #23104BilalGuesti am looking for Tenor A800 config.
using ADSL router 1 extip Tenor box is on static pvt ip.
my tenor box receives trhe call. but drops after 1 bellany solutions
-
AuthorPosts
- The forum ‘Voice over IP’ is closed to new topics and replies.