Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Quintum 800

Viewing 15 posts - 31 through 45 (of 205 total)
  • Author
    Posts
  • #22985
    noname
    Guest

    You have been A200ized. That box is a pain on the …… Quintum should be releasing a new piece of equipment that replaces that nightmare. You may be able to get a replacement for little money and returning the A200 to Quintum.
    It is worth a try.

    #22986
    shaheen
    Guest

    Hi

    could someone point me out where I could find some docs on Quintum A800 on which i’m connecting an analog phone to connect to a softphone ( like netmeeting) .

    How do I dial an IP address on my normal phone that is connectedt to the quintum A800. What are the settings required.

    Please emmail me :
    am_eurosiaticvoip@skynet.be

    #22987
    Leon
    Guest

    You will have to create a static route under Border Element and there you map IP to a calling party number, then when this number gets dialed on your phone Tenor will route it over IP to a address specified.You can’t dial an IP address on your phone connected to a A800.

    #22988
    pejman eslami
    Guest

    hi
    i have quintum D3200 in IRAN,only with System Software Version p4-1-15 tenor work correctly, but i lose this version and it isn’t in quintum site , how can i get p4-1-15 ?

    #22989
    shani
    Guest

    Hi,

    I am looking for H.323 client (software cleint) that supports H.245 tunneling. any idea?

    #22990
    Imran
    Guest

    Jeff

    We have the A400 connected on a private LAN (192.168.xxx.xxx) with an DHCP server (192.168.1.1) on the router but the a400 does not take the dhcp server at all and is n not able to take any IP from the dhcp server. Can u suggest what to do?

    #22991
    Hwyking
    Guest

    you have to assign the IP manually…I got it to work w/no problem…

    #22992
    CHristNY3537
    Guest

    I am trying to configure a Quintum Tenor for VOIP but is my first time, somebudy could send me a email with step by step configuration.

    Thnx

    #22993
    Blue Lava
    Guest

    If you’re looking to configure the Quintum A or D series to do anything useful the first thing to do is throw away the Quintum manual. The second thing is to forget the GUI browser interface – nothing useful can be done from here.
    To make things really simple ask someone for a working configuration. This can be done simply by running a telnet session to the working gateway, logging in, and then typing:
    > co [return]
    > print [return]

    This will print out the whole configuration.

    I can supply you with a couple of working config’s if you need them – one for Cisco inter-op and one for NetMeeting.

    This will get you up and running quickly – after this spend some time learning the Command Line Interface (CLI).

    Hope this helps.

    #22994
    dario007
    Guest

    Bluelava, how can I get a config file for A800?

    #22995
    Noname
    Guest

    I have a sample configuration with A400.

    It is the same than the A800, less ports.

    Total agreement with blue lava. Do not even try the GUI. Nothing but outdated software.

    If anyone wants the sample configuration of the A400 write to mike3799@yahoo,and I will send it.

    Best regards!!!!!

    #22996
    Andrey
    Guest

    Write to me trigoman@walla.co.il
    and i can give you the configure of quintum a800

    #22997
    Narendra
    Guest

    We would like to configure Quintum Tenor A800 to talk with Cisco ATA VoIP Box.

    Cisco Box is configured and connected phone instrumet directly.

    I have configured the Quintum Box’s sroute with Cisco IP.

    From the Cisco Box I am able to dial Quintum.

    But if I dial from Quintum to Cisco box it is giving engage tone (I dont want to dial PSTN line).

    Please advice on this issue.

    #22998
    Shaikh Amir
    Guest

    Hi,

    well there are same number of ports on both A400 and A800 please confirm that how can we configure 8 connections on A800 with pbx or pstn.

    Regards,
    Amir

    #22999
    Rey A
    Guest

    Good day.

    I have a Quintum d3200 and would like to know how to configure it to originate calls to another voip gateway. Need to know how to do it from pstntg and pbxtg with the unit as border element itself.

    Will appreciate your help.

    Thank you in advance.

Viewing 15 posts - 31 through 45 (of 205 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.