- This topic has 44 replies, 1 voice, and was last updated 9 years, 7 months ago by ronald.
2nd September 2006 at 07:14 #36948muhammad arshadGuest
CB messages are not displayed even locally in BSC means when we want to display some message on a cell by creating it in BSC itself.This is an outstanding issue for us for BSC2i.what may be the problem13th May 2009 at 01:30 #36949WilGuest
Hi, does DX200 has a default announcement error messages? Thanks16th October 2009 at 05:57 #36950YohanGuest
Would you mind sharing your Nokia Softswitch .inf?
br, Yohan.26th October 2009 at 11:19 #36951nonameGuest
How to identify(read correctly) the SW version from the used SW build in Nokia MSS or HLR, after using ZWQO:CR; ???8th November 2009 at 13:31 #36952MouleyGuest
Hi, after using ZWQO:CR; from MSS you’ll get information about Running Software Build, it is identified as BU .
Here is the Identification of SW build states :
BU = BACKUP (Active SW Build)
NW = New
FB = Fall Back
from the BU SW Build you get the PACKAGE-ID to identify SW version.9th November 2009 at 15:38 #36953nonameGuest
I know that.
I ment, how to identify from the package id, what sw release is installed: m12, m13, m13.6, m14 etc.?
is there a short description, how to define this from the loaded package id?
thanks again!10th November 2009 at 09:01 #36954MouleyGuest
sorry for misunderstanding.
So you may have to check the Prefix of your package ID.
Package ID = ME x.y-z
Package ID = MD x.y-z
ME = M14 (E in hex = 14 in dec)
MD = M13 (D in hex = 13 in dec)
Hope it’ll help.
Mouley10th November 2009 at 11:28 #36955SameerGuest
Need help with a BSC2i DX200
4 issues and would really like any help that you can give.
1)I need the wiring diagram for converting the LAN POST(RJ45) to D-SUB(9PIN) , The card LAN post( RJ45) is the CPU’s card of the OMU
2)-The VDC could not login with OMU, So they could not know about the status of the BSC
3)-Repeat lights of the HWAT card in the OMU show a red light
4)-The three cards of AS7 in the OMU are constant light2nd February 2010 at 09:40 #36956ANJAN DASGuest
CUG MML Command for DX20015th February 2010 at 16:35 #36957alemnewGuest
How to configure gb interface on Nokia DX 200 iBSC i.e. the Exchange Terminal(ET) that connects the BSC with SGSN?17th February 2010 at 12:58 #36958nonameGuest
thanks a lot Mouley8th November 2010 at 16:01 #36959raviGuest
need dx 200 commands script8th February 2011 at 07:26 #36960FarazGuest
please provide me the shutdown procedure or command for nokia dx 200 MSS16th July 2011 at 13:01 #36961VIKASGuest
HI, CAN ANYONE HELP ME TO GIVE THE NOKIA DX 200 AND 220 BASIC UNITS I.E CARDS AND THEIR FUNCTION AS WELL AS COMMANS USED . I M FRESHER IN THIS FIELD.28th September 2011 at 14:36 #36962ronaldGuest
somebody can help for implement presence services in nokia dx200 .. I need that for my work…
thank.. for help me..