- This topic has 102 replies, 1 voice, and was last updated 11 hours, 8 minutes ago by LyncByday.
29th December 2010 at 19:46 #56643DAMIGuest
Plz, can anybody tell me the command to change the site name? Thanks in advance,3rd January 2011 at 12:23 #56644Tahir MdGuest
Rlmbc:id=50,code=9,gs=3,page=1,text=”Rename”;10th January 2011 at 13:28 #56645samGuest
according to your query, you cant latch you ms to a particular BTS, untill you do not change you position. as per knowledge.
regards,10th January 2011 at 13:35 #56646samGuest
RDI-Remote defect indication
basically RDI is a loose connect at the end side, it is easily removed by connecting it properly.
Regads,16th January 2011 at 14:09 #56647neerajGuest
rlcrp give all sites.
But i want count that this bsc has that much no. Of sites.
2ndly, is there any command which print only the down sites?
Pls help me out
regards,.8th February 2011 at 07:15 #56648GisGuest
Can someone please tell me what commands to use to increase Gb link time slots on the BSC?10th February 2011 at 17:26 #56649ChaitanyaGuest
6.if u receive any alarm regarding seizure supervision of device RALT then Reset seizure supervision alarm for device type RALT using the command RASAR:DETY=RALT;.
And RALT is the device connected between BSC and MSC.
1.APG–Adjunct Processor Group
it is nothing but an I/O device,an interface between user and the node what ever input we r giving r receiving is through APG only
used for event handling
we can get different types of RP fault we have to work according to that fault.
3.CP–Central Processor22nd February 2011 at 12:12 #56650gsmGuest
Hi,can any body please suggest how we can observe digital path quality historical storage data,and how to check site down time history(not referring BO report,but by using command)?
can we check which dip is carrying data (dip defined as rtg of course carries data,but i want to check whether any other dip assigned for carrying data,becuse in my BSC,i see all RTGs defined are down,but still GPRS is being accessed in cells),please help23rd February 2011 at 18:13 #56651manishGuest
Can someone please tell me about RP card in bsc24th February 2011 at 11:38 #56652CollinsGuest
Hi all here, I am not very new to ericsson BSC, though i want to know how to perfom advanced tasks like increasing cell power, halting a particular trx, and any other management commands…
can some one help? my email is email@example.com February 2011 at 12:08 #56653CollinsGuest
in reponce to your question.
An RP FAULT alarm is received in the following cases:
1. When a fault in a Regional Processor (RP) is detected
2. When there is a fault in the application, connected to the RP (if the application supports this function)
3. When a recovery attempt is made of an RP, located in a magazine which is adapted to the Regional Processor Bus of Serial type (RPB-S), and where the magazine has no valid address25th February 2011 at 22:48 #56654AKKIGuest
Thx a lot collins n Chaitanya.
Guys can anybody guide me about the interview questions for BSS Back Office Engr. I mean what questions generally recruiter asked.
Thx in advance .3rd October 2011 at 18:45 #56655SubhashGuest
Hi GIS..Gb link time slots on the BSC..
rrinp:nsei=all;18th May 2012 at 07:09 #56656Mr 1 2 knowGuest
Hie,I want to know is there any command can show alarm for specific site which I only wanted to monitor?…like “allip:a…;” show all site alarm18th May 2012 at 08:39 #56657BijoyGuest