- This topic is empty.
6th June 2012 at 04:11 #56658gaberGuest
Can anybody tell me how can I find and learn the commands function in ericsson?8th June 2012 at 15:56 #56659RazGuest
Gaber you can have all you want in the Ericsson documentation . it is called ALEX.8th October 2012 at 08:22 #56660FizeyGuest
Can anyone tell me if there is a command on bsc to get data of all cells connected (serial number of trx and dux’s)8th October 2012 at 18:06 #56661pixGuest
probably RXMOP:MOTY=xxxx, ALL; or something like this. I can give you the detailed (correct) answer tomorrow 🙂9th October 2012 at 10:50 #56662pixGuest
i only found the serial number by using the BSM (base station manager). I guess you can get it with the AXE command “hwiprint” too, but i’m didn’t try.
pix10th October 2012 at 04:34 #56663Mr 1 2 KnowGuest
1) Is there any commands that can show if the site(s) was equip with EDGE or GPRS services?
2) How to check total of GBL(link) equip to RNC?
3) Is there any setting for MMS at site or RNC can be set so it can be send out much faster, as I am facing slow MMS throughout-put although less user at site.22nd October 2012 at 11:52 #56664kella kashi viswanathGuest
Hi I need the brief discriptio for the command
C7CTI in winfiol.31st October 2012 at 08:13 #56665Mr 1 2 KnowGuest
Is there any command can be use to reset GSM (2G)sites?9th November 2012 at 12:34 #56666SOSTEGuest
Hi friends !This is commands for verify GPRS /EDGE: RLGSP:CELL=CNQ3121;24th November 2012 at 21:18 #56667J18Guest
Hi Mr 1 2 Know;
for reset sites(2G)
halted site: rlstc:cell=
block MO: rxbli:mo=
active site: rlstc14th February 2013 at 04:27 #56668Mr 1 2 KnowGuest
I wish to know if there is any commands that can view SIU IP at GSM site (stand alone site). I’m facing difficulties to reset SIU at GSM site because I don’t have @ can’t get the IP from OS, compare to 3G SIU IP i can view from citrix.2nd April 2013 at 02:35 #56669Mr 1 2 KnowGuest
Hie all,can any one help me on how to clear SIU alarm as below?..SIU reset done but this alarm keep on appear at SIU. What actually causing this situation?..pls help
eventTime= 2013-04-01 T04:28:04;
specificProblem= “No Calibration from Time Server”;
additionalText= “Timing quality too bad or missing time server.”;4th April 2013 at 19:20 #56670bertGuest
Use alex ,but the cmd to find the steriel nmr etc fort the trx’s is rxmfp20th April 2013 at 10:37 #56671BELKREDIMGuest
SGSN and GGSN (Gn/Gp) is broken.23rd April 2013 at 20:34 #56672seckaGuest
I need one commande to check the bandwith allocate by the BSC to one site on EI over IP.