- This topic has 409 replies, 1 voice, and was last updated 17 years, 9 months ago by
Dude.
-
AuthorPosts
-
12th July 2003 at 19:02 #33873
Jyothi
GuestHello Everyone,
I am really finding a lot of useful information here.
Jyothi.
13th July 2003 at 10:26 #33874Muzammil
GuestAsad,
CorDECT is the DECT Standard created by IIT, Chennai and Midas Communications,Chennai, I think.
Where are you working? Are u in the Southern Part of India, BSNL has a pilot project in implementing the CorDECT to Rural Villages.
Your views are welcome.
Best Regards.
16th July 2003 at 00:57 #33875Zhu Jiang
GuestI am Siemens employee. In charge of SSS OAM. Communication with others is helpful.
Contact
16th July 2003 at 01:06 #33876Zhu Jiang
GuestHi, Mr. Khalid alzway,
There are many good training courses in Shanghai Siemens Mobile Communication Ltd,. China.
And there are many switchings for test bed. You will do exercises there.
That is a good place.
And that is my company.BR
16th July 2003 at 12:07 #33877Asad
GuestHi Muzammil
I am here in UP working with Reliance as it is also deploying corDECT in rural areas17th July 2003 at 02:25 #33878Zhu Jiang
GuestI have already worked in Siemens D900 GSM environment for more than 4 years. Now, I have lots of experience. Especially, emergency affairs.
Keep in touch17th July 2003 at 05:12 #33879Nguyen
GuestHi Mr. Zhu Jiang,
Pls kindly adv if you have any experience with the commands MOBTHR and NETTIMER. What are the meaning of these threshols and timers, how do they affect to the system operation and which rule should be applied when you want to modify them ???
Pls adv if you have got any tools/utilities to work with EWSD D900 GSM?
Brgds
20th July 2003 at 23:57 #33880asif
Guesti am also an engineer but i have no answer to your question
25th July 2003 at 09:43 #33881Kumar
GuestHi,
Can anybody give the reference books details for Switch Engineering Guidelines for both GSM & CDMA services?
I am in urgent need to know about the Switch Dimensioning. If anyone knows about this kindly let me know the details.27th July 2003 at 11:54 #33882Muzammil
GuestHi Kumar,
Nice book avail. on Ericsson’s website. Look in to the following link,http://www.ericsson.com/support/telecom/index.shtml
in this, if u see, PLMN – section, u can find switch and switch control. It gives a fair idea on switch dimensioning. Printed copy is also available.
This book also might help you,
GSM Switching, Services, and Protocols — Joerg Eberspaecher.
regds.
31st July 2003 at 12:18 #33883Mostafa
GuestHi all,
I’ve a pb,a high TCH drop call rate,Can this pb come from BSC/TRC node or MSC/VLR node .
We have Ericsson technology.
Thanx.
2nd August 2003 at 17:54 #33884Jyothi
GuestHi Mostafa,
The TCH Call drop is caused when the quality of the call is not good or due to other reasons. This TCH drop can be rectified by properly defining the handover – parameters in the BSC NODE.
Regards,
Jyothi4th August 2003 at 12:39 #33885Mostafa
GuestThanks Jyothi,
We have drop calls in a remote BSC for “other reasons”,no handover failures, all radio parameters are OK,all neighboors are ok i’m asking if this pb can come from TRC.
Regards
6th August 2003 at 13:01 #33886Kumar
GuestHello Muzammil
Thanks for the reply.
The website of Ericsson was very useful. Thank you once again.
Do you have any such details for Siemens EWSD Switch? If so let me know.
Regards,
Kumar6th August 2003 at 13:18 #33887Muzammil
GuestKumar,
Unlike Ericsson, Siemens doesn’t post their docs. on the web… I’ve tried a lot for EWSD..but it’s all avail. only if we’r ready to shell out something from our pocket. I hardly foud docs. on the web. But almost all ericsson AXE docs. (except training manuals) are avail. on their website.
regds.
-
AuthorPosts
- The forum ‘Telecom Design’ is closed to new topics and replies.