» Home » Topics » Telecom Design Paging Success Rate
Sowjanya Pls tell which equipment you using, if u want to implement Paging Strategies differently in different LAC
Hi tajider,We are using Ericsson switch.
Hi Can anyone tell how to improve PSR in ZTE system, what are the parameters neet to be verified in MSS
Kindly suggest how to increas PSR in Ericsson Switch.SD drop above 1% in all bsc in one MSC POOL.
@HARISH first check
1.global PSR strategies (Multi LAI,Bsc page, All BSC page )
2.Check value of first,second and third paging timer, modify them to value 10 if u can or increase them
3.Check timer T 3113 in BSC, change value to as of first paging timer in MSC
4.Then try different LAC strategies of every different LAC
Hi Mainik Chandra,
What is handoff paging Timer, can you explain more detail?
KINDLY LET ME KNOW HOW TO IMPROVE PSR IN HUAWEI MSC
1)how to increase ASR in Ericsson network.
2)how to calculate GB link utilization.
3)what is the bench mark of core KPI in ericsson network.
In order to increase PSR, plz follow the following steps:
– Check T3212 in BSS, and set Implicit Detach Timer in MSC to 6*T3212 + 1
– T3113 (in MSC, not in BSS) must be set to T3101 + (3-5)seconds
– T3101 (in BSS) set to 3-5 seconds
i use Ericcsion MSC/Bsc’s
how to improved PSR%. i have low PSR rating. so clearly give me stp by stp by procedure.
How to improuve PSR in ZTE Core ?
reduce the value of parameter” BS-PA-MFRAMS
for Periodical location updating timer T3212
i did not find them
what is the value of timer T3113…..
How much seconds………..
Hi Arvind solanlki
The value of T3113 is 7 sec
The forum ‘Telecom Design’ is closed to new topics and replies.