Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

ARJ PROBLEM

  • This topic has 19 replies, 1 voice, and was last updated 9 years, 3 months ago by Michael Okongo Sangoro.
Viewing 15 posts - 1 through 15 (of 20 total)
  • Author
    Posts
  • #31181 Reply
    savyn
    Guest

    hi all,

    Im facing arj problem on gateway that carriers are complianing low asr and acd,most of time i check on my gateway it show below mentioned log,this existing from last 15 days.

    excp |01/01| 2006/11/16|05:56:13:780 |> CH < H323CALLGK::Arj() - IC IP cal ls ARJ failed (reason=5) excp |01/01| 2006/11/16|06:09:23:505 |> CH < H323CALLGK::Arj() - IC IP cal ls ARJ failed (reason=5) excp |01/01| 2006/11/16|06:09:24:925 |> CH < H323CALLGK::Arj() - IC IP cal ls ARJ failed (reason=5) excp |01/01| 2006/11/16|06:09:26:330 |> CH < H323CALLGK::Arj() - IC IP cal ls ARJ failed (reason=5) Any one please help me out with your valuable suggestion,Advance thanks for your help

    #31182 Reply
    MikeM to Savyn
    Guest

    Savyn,

    Check 2 things.

    1. alarm act – see if there is an active alarm that the GK is not available or something like that. If the alarm is there, then the tenor is not able to contact the gk. If it is the internal gk, reset the unit.

    2. if you have setup the epad area to allow only specific IP addresses, make sure that you have added the tenor’s own IP address as well or no calls will work.

    Mike

    #31183 Reply
    savyn
    Guest

    Thanks for your reply mike,

    i checked alarms there i had found below mentioned info.

    :263:RPT:3:No Responce to Seizure:0:0:2:23:THU NOV 16 12:50:16 2006

    264:RPT:3:No Responce to Seizure:0:0:2:24:THU NOV 16 12:50:18 2006

    :265:RPT:3:No Responce to Seizure:0:0:2:4:THU NOV 16 12:50:25 2006:266:RPT:3:No

    Responce to Seizure:0:0:2:8:THU NOV 16 12:51:25 2006

    #31184 Reply
    savyn
    Guest

    Mike,

    Im getting those errors continiously,can u pls let me know wht to do.

    :304:RPT:3:No Responce to Seizure:0:0:2:20:THU NOV 16 13:15:29 2006

    :305:RPT:3:No Responce to Seizure:0:0:2:22:THU NOV 16 13:15:35 2006

    :306:RPT:3:No Responce to Seizure:0:0:2:24:THU NOV 16 13:15:42 2006

    :307:RPT:3:No Responce to Seizure:0:0:2:19:THU NOV 16 13:19:56 2006

    :308:RPT:3:No esponce to Seizure:0:0:2:23:THU NOV 16 13:20:14 2006

    309:RPT:3:No Responce to Seizure:0:0:2:24:THU NOV 16 13:20:43 2006

    #31185 Reply
    MikeM to savyn
    Guest

    Savyn,

    This means that when the tenor tried to send a call out of the FXO, it did not detect dialtone and could not send the call. Check your connections.

    MikeM
    mike_voip@hotmail.com

    #31186 Reply
    driss benattou
    Guest

    please,
    what does it meaning

    excp |01/01| 2007/07/26|15:19:47:340 |> CH < H323CALLGK::Arj() - IC IP calls ARJ failed (reason=3) thanks.

    #31187 Reply
    MikeM to driss benattou –
    Guest

    This means that the Tenor’s internal GK rejected a request. Most likely this is on an incoming IP call and it is possible that you are using the allow table and and maybe the originating IP address is not in the allowed list.

    MikeM
    mike_voip@hotmail.com

    #31188 Reply
    driss benattou
    Guest

    HELLO,

    I HAVE CALL RELAY AND I AM NOT SURE THAT I CONFIGURED IT CORRECTLY.

    PLEASE SEND ME ANY TYPICAL CONFIGURATION TO HELP ME TO COFIGURE THIS CRSP.

    REGARDS

    #31189 Reply
    MikeM to driss benattou
    Guest

    The typical config is just to configure static routes for term with the correct pattern. After that it all depends on what you are trying to completely.

    MikeM
    mike_voip@hotmail.com

    #31190 Reply
    Raj
    Guest

    Im facing ARJ problem on gateway that carriers are complianing low ASR, most of time i check (ev qu) on my gateway it show bellow log,this existing from last 20 days.

    excp ….CH < H323CALLGK::Arj() - IC IP calls ARJ failed (reason=5) Please help me to get me out from this problem. Special thanks in advance.

    #31191 Reply
    Mike_Voip to Raj
    Guest

    If this is a quintum, most likely reason is you have not configured the origination IP addr in the quintum to be allowed.

    #31192 Reply
    Nick
    Guest

    i get “ARJ Received Reason=3” error too. The call is incoming from E1. and will outgoing to E1. Thanks you.
    Thank you.

    #31193 Reply
    InboundDNISXlateDirAttached
    Guest

    i have incoming traffic from E1-port-1, tcrg-port-1. i have Outgoing traffic to E1-port-2, tcrg-port-2, and hnd-port-2, attached to tcrg-port-2. if incoming traffic from e1-port-1 with prefix, that can match with hnd-port-2, calls success went through. if incoming traffic without prefix, i try add prefix in InboundDNISXlateDirAttached, call failed. quintum log showed:
    ARJ Received Reason=3.
    h323: tcall:RcvRelComp, cause=0 reason=1.
    CallInfo: disconnected event. cause=34 legno=1 leg=1 sentLeg=0.

    #31194 Reply
    MikeM to InboundDNISXlateDirA
    Guest

    The ARJ is a gatekeeper rejection error. You are probably using the quintum’s internal gatekeeper and this code means that the request was denied. This typically happens if it cannot find a match for the incoming call.

    Without seeing the full config and troubleshooting, I really cannot say further.

    MikeM
    mike_voip@hotmail.com

    #31195 Reply
    Nick
    Guest

    My intention on this config is to add a prefix to incoming E1 calls (1st E1 – incoming), and route to another E1(2nd E1 – outgoing). Im using internal routing, without gatekeeper. Is this possible to achieve? Pls advice. Thank you.

    show -l

    -VOIPNetwork-1
    /*—————-
    name: (Not Set)
    AdminContact: (Not Set) (Admin contact information)
    ——————*/

    -SIte-1
    /*—————-
    name: (Not Set) (site name)
    AdminContact: (Not Set) (administrator name)
    EnableDBDailyBackup: 0 (Diabled;Default)
    DBDailyBackupHour: 0 (hour)
    ——————*/

    -TimeServer-1
    /*—————-
    UTCOffset: 8:00 (in +/-hrs from UTC time,default)
    PrimaryServerIPAddr: 0.0.0.0
    SecondaryServerIPAddr: 0.0.0.0
    ——————*/

    -DialPlan-1
    /*—————-
    MAXDNlength: 20 (max DN length)
    MINDNlength: 7 (min DN length)
    LongDistancePrefix: (Not Set) (Numeric string)
    CarrierPrefixPattern: (Not Set) (101xxxx;x is 0 to 9)
    INTernationaLPrefix[1..8]: (Not Set)
    IntercomEnable: 0 (No; default)
    InterDigitTimeout: 2 (secs; default)
    DialPlanCountry: 0 (Generic CCITT)
    ProgressToneCountry: 0 (US)
    AllowUnmatchedNumbers: 0 (disable,default)
    CountryCode: (Not Set) (digits 1 to 7)
    AreaCode: (Not Set) (Numeric String)
    ——————*/

    -UserProgramDialPlan-1
    /*—————-
    ——————*/

    -IPDialPlan-default
    /*—————-
    name: (Not Set)
    INcomingDelDigits: 0 (0-15: default)
    OUTgoingDelDigits: 0 (0-15; default)
    INcomingPrefix: (Not Set) (Numeric string)
    OUTgoingPrefix: (Not Set) (Numeric string)
    OUTgoingTechPrefix: (Not Set) (Numeric string)
    INcomingTechPrefix[1..3]: (Not Set)
    PrefixTrunkID: 0 (Diabled;Default)
    ——————*/

    -PRIVateNumberingPlan-1
    /*—————-
    PRIVateDNEnabled: 0 (No; default)
    PRIVateDNLength: 3 (default length)
    ——————*/

    -MasterChassis-1
    /*—————-
    PrimaryClockSource: 0 (Internal)
    SecondaryClockSource: 0 (Internal; default)
    SNMPSysLocation: (Not Set) (location info for SNMP)
    SNMPSysContact: (Not Set) (contact info for SNMP)
    SNMPSysDescription: (Not Set) (SNMP Description)
    SNMPSysName: (Not Set) (System name for SNMP)
    SNMPTrapIP1: (Not Set) (SNMP Trap IP addr 1)
    SNMPTrapIP2: (Not Set) (SNMP Trap IP addr 2)
    SNMPTrapIP3: (Not Set) (SNMP Trap IP addr 3)
    SNMPPublicCommunity: (Not Set) (id information)
    SNMPTrapCommunity: trap community (id information)
    ——————*/

    -IVRFileServer-1
    /*—————-
    RequestTimeout: 5
    PrimaryServerPort: 69
    PrimaryServerIPAddr: 0.0.0.0
    SecondaryServerPort: 69
    SecondaryServerIPAddr: 0.0.0.0
    ——————*/

    -RemoteTenorManagerInfo-1
    /*—————-
    ConnectTimer: 30 (seconds)
    Udp: 1 (use udp)
    PrimaryServer: (Not Set) (IP address)
    SecondaryServer: (Not Set) (IP address)
    ——————*/

    -SYSLogServer-1
    /*—————-
    id: 1
    name: (Not Set)
    SYSLogPort: 514 (Syslog Server IP port, default)
    SYSLogIPAddr: 0.0.0.0
    SYSLogFacility: 16 (Syslog Server facility code, de)
    ——————*/

    -CDRServer-1
    /*—————-
    id: 1
    name: (Not Set)
    CDRFormat: 104 (CMS CDR plus other)
    CDRServerPort: 9005 (default)
    CDRServerIPAddr: 0.0.0.0
    CDRPassWord: (Not Set) (Alphanumeric String)
    ——————*/

    -ChannelGroup-SL6DV1DI1
    /*—————-
    SignalingGroupAttached: ISDNSignalingGroup-user
    RoutingGroupAttached: TrunkCircuitRoutingGroup-Incoming-E1
    ——————*/

    -ChannelGroup-SL6DV1DI2
    /*—————-
    SignalingGroupAttached: ISDNSignalingGroup-user
    RoutingGroupAttached: TrunkCircuitRoutingGroup-Outgoing-E1
    ——————*/

    -SLot-SL1
    /*—————-
    name: Tenor CMS System Controller
    Type: 10 (Read only, Card Type)
    SlotNumber: 1 (Read only, Slot Number)
    ——————*/

    -DeVice-SL1DV1
    /*—————-
    name: QSystem Controller Card (Read only)
    DeviceType: 10 (Read only)
    DeviceNumber: 1 (Read only)
    ——————*/

    -EthernetInterface-SL1DV1EI1
    /*—————-
    name: (Not Set) (name)
    PortNumber: 1 (Read Only, Physical port number)
    ManagementAccess: 1 (Access Enabled; Default)
    DUPlex: 0 (Auto)
    SPeed: 0 (Auto 10/100 mbps; Default)
    IPAddress: 202.76.227.18
    WebServerPort: 8080 (Port Number)
    SubneOutgoing-E1ask: 255.255.255.240
    ExternalNATIPAddr: 0.0.0.0
    InternalNATIPDirAttached: (unspecified)
    FilterIPDirAttached[1..32]: (unspecified)
    ——————*/

    -StaticIPRouteDir-1
    /*—————-
    ——————*/

    -StaticIPRoute-0
    /*—————-
    Gateway: 202.76.227.1
    Destination: 0.0.0.0
    NeOutgoing-E1ask: 0.0.0.0
    Metric: 1
    EIAttached: EthernetInterface-SL1DV1EI1
    ——————*/

    -NATIPDir-1
    /*—————-
    name: (Not Set)
    ——————*/

    -SLot-SL2
    /*—————-
    name: (Not Set)
    Type: 0 (Read only, Card Type)
    SlotNumber: 2 (Read only, Slot Number)
    ——————*/

    -SLot-SL3
    /*—————-
    name: (Not Set)
    Type: 0 (Read only, Card Type)
    SlotNumber: 3 (Read only, Slot Number)
    ——————*/

    -SLot-SL4
    /*—————-
    name: (Not Set)
    Type: 0 (Read only, Card Type)
    SlotNumber: 4 (Read only, Slot Number)
    ——————*/

    -SLot-SL5
    /*—————-
    name: Tenor CMS 8-Port DS1 Card
    Type: 7 (Read only, Card Type)
    SlotNumber: 5 (Read only, Slot Number)
    ——————*/

    -DeVice-SL5DV1
    /*—————-
    name: Q8-Port DS1 Card (Read only)
    DeviceType: 7 (Read only)
    DeviceNumber: 1 (Read only)
    ——————*/

    -DigitalInterface-SL5DV1DI1
    /*—————-
    name: digital interface
    PortNumber: 1 (read only)
    LineType: 1 (E1)
    LAW: 1 (aLaw)
    LineCode: 2 (HDB3, for E1 only)
    CRC: 1 (Enable CRC)
    StaticChannelConnection: 0 (disabled)
    ——————*/

    Channel Mapping Table

    Channel CG-SL6DV1DI1
    ——- ————
    1..15 X
    17..31 X

    -DigitalInterface-SL6DV1DI2
    /*—————-
    name: digital interface
    PortNumber: 2 (read only)
    LineType: 1 (E1)
    LAW: 1 (aLaw)
    LineCode: 2 (HDB3, for E1 only)
    CRC: 1 (Enable CRC)
    StaticChannelConnection: 0 (disabled)
    ——————*/

    Channel Mapping Table

    Channel CG-SL6DV1DI2
    ——- ————
    1..15 X
    17..31 X

    -DigitalInterface-SL6DV1DI3
    /*—————-
    name: digital interface
    PortNumber: 3 (read only)
    LineType: 1 (E1)
    LAW: 1 (aLaw)
    LineCode: 2 (HDB3, for E1 only)
    CRC: 1 (Enable CRC)
    StaticChannelConnection: 0 (disabled)
    ——————*/

    Channel Mapping Table

    Channel CG-SL6DV1DI3
    ——- ————
    1..15 X
    17..31 X

    -DigitalInterface-SL6DV1DI4
    /*—————-
    name: digital interface
    PortNumber: 4 (read only)
    LineType: 1 (E1)
    LAW: 1 (aLaw)
    LineCode: 2 (HDB3, for E1 only)
    CRC: 1 (Enable CRC)
    StaticChannelConnection: 0 (disabled)
    ——————*/

    Channel Mapping Table

    Channel CG-SL6DV1DI4
    ——- ————
    1..15 X
    17..31 X

    -DigitalInterface-SL6DV1DI5
    /*—————-
    name: digital interface
    PortNumber: 5 (read only)
    LineType: 1 (E1)
    LAW: 1 (aLaw)
    LineCode: 2 (HDB3, for E1 only)
    CRC: 1 (Enable CRC)
    StaticChannelConnection: 0 (disabled)
    ——————*/

    Channel Mapping Table

    Channel CG-SL6DV1DI5
    ——- ————
    1..15 X
    17..31 X

    -DigitalInterface-SL6DV1DI6
    /*—————-
    name: digital interface
    PortNumber: 6 (read only)
    LineType: 1 (E1)
    LAW: 1 (aLaw)
    LineCode: 2 (HDB3, for E1 only)
    CRC: 1 (Enable CRC)
    StaticChannelConnection: 0 (disabled)
    ——————*/

    Channel Mapping Table

    Channel CG-SL6DV1DI6
    ——- ————
    1..15 X
    17..31 X

    -DigitalInterface-SL6DV1DI7
    /*—————-
    name: digital interface
    PortNumber: 7 (read only)
    LineType: 1 (E1)
    LAW: 1 (aLaw)
    LineCode: 2 (HDB3, for E1 only)
    CRC: 1 (Enable CRC)
    StaticChannelConnection: 0 (disabled)
    ——————*/

    Channel Mapping Table

    Channel CG-SL6DV1DI7
    ——- ————
    1..15 X
    17..31 X

    -DigitalInterface-SL6DV1DI8
    /*—————-
    name: digital interface
    : 8 (read only)
    LineType: 1 (E1)
    LAW: 1 (aLaw)
    LineCode: 2 (HDB3, for E1 only)
    CRC: 1 (Enable CRC)
    StaticChannelConnection: 0 (disabled)
    ——————*/

    Channel Mapping Table

    Channel CG-SL6DV1DI8
    ——- ————
    1..15 X
    17..31 X

    -DeVice-SL6DV2
    /*—————-
    name: Q120-Port DSP Card (Read only)
    DeviceType: 8 (Read only)
    DeviceNumber: 2 (Read only)
    ——————*/

    -DeVice-SL6DV3
    /*—————-
    name: Q120-Port DSP Card (Read only)
    DeviceType: 8 (Read only)
    DeviceNumber: 3 (Read only)
    ——————*/

    -SLot-SL7
    /*—————-
    name: Tenor CMS 8-Port DS1 Card
    Type: 7 (Read only, Card Type)
    SlotNumber: 7 (Read only, Slot Number)
    ——————*/

    -DeVice-SL7DV1
    /*—————-
    name: Q8-Port DS1 Card (Read only)
    DeviceType: 7 (Read only)
    DeviceNumber: 1 (Read only)
    ——————*/

    -DigitalInterface-SL7DV1DI1
    /*—————-
    name: digital interface
    PortNumber: 1 (read only)
    LineType: 1 (E1)
    LAW: 1 (aLaw)
    LineCode: 2 (HDB3, for E1 only)
    CRC: 1 (Enable CRC)
    StaticChannelConnection: 0 (disabled)
    ——————*/

    Channel Mapping Table

    Channel CG-SL8DV1DI8
    ——- ————
    1..15 X
    17..31 X

    -DeVice-SL8DV2
    /*—————-
    name: Q120-Port DSP Card (Read only)
    DeviceType: 8 (Read only)
    DeviceNumber: 2 (Read only)
    ——————*/

    -DeVice-SL8DV3
    /*—————-
    name: Q120-Port DSP Card (Read only)
    DeviceType: 8 (Read only)
    DeviceNumber: 3 (Read only)
    ——————*/

    -NMSServer-1
    /*—————-
    PrimaryServerPort: 0
    PrimaryServerIPAddr: 0.0.0.0
    SecondaryServerPort: 0
    SecondaryServerIPAddr: 0.0.0.0
    ——————*/

    -DNSHosts-1
    /*—————-
    ——————*/

    -DNSServer-1
    /*—————-
    PrimaryServerIPAddr: 0.0.0.0
    SecondaryServerIPAddr: 0.0.0.0
    ——————*/

    -RadiusInfo-UserServer
    /*—————-
    name: User Authentication Server
    PrimaryAuthenticationPort: 1812 (default)
    PrimaryServerIPAddr: 0.0.0.0
    PrimaryACcountingPort: 1813 (default)
    SecondaryAuthenticationPort: 1812 (default)
    SecondaryServerIPAddr: 0.0.0.0
    SecondaryACcountingPort: 1813 (default)
    RetryCount: 3 (Retry Count,default)
    Timeout: 5 (Time Out in seconds)
    AccountingType: 0 (no acct.msgs)
    SharedSecret: (Not Set) (Up to 63 chars)
    BillingVendor: 0 (support Cisco;default)
    UseModifiedDN: 0 (disable)
    FailoverRetryInterval: 0 (calls,default 0)
    ——————*/

    -RadiusInfo-EndpointServer
    /*—————- name: Endpoint Authorization Server
    PrimaryAuthenticationPort: 1812 (default)
    PrimaryServerIPAddr: 0.0.0.0
    PrimaryACcountingPort: 1813 (default)
    SecondaryAuthenticationPort: 1812 (default)
    SecondaryServerIPAddr: 0.0.0.0
    SecondaryACcountingPort: 1813 (default)
    RetryCount: 3 (Retry Count,default)
    Timeout: 5 (Time Out in seconds)
    SharedSecret: (Not Set) (Up to 63 chars)
    IDType: 0 (IP Address, default)
    PasswordType: 0 (IP Address, default)
    FailoverRetryInterval: 0 (calls,default 0)
    ——————*/

    -RadiusInfo-RoutingServer
    /*—————-
    name: External Routing Server
    PrimaryServerIPAddr: 0.0.0.0
    SecondaryServerIPAddr: 0.0.0.0
    RetryCount: 3 (Retry Count,default)
    Timeout: 5 (Time Out in seconds)
    SharedSecret: (Not Set) (Up to 63 chars)
    GateWayID: 0 (an integer)
    LocalRoutingFallback: 1 (fallback to local RS)
    FailoverRetryInterval: 0 (calls,default 0)
    ——————*/

    -SS7Gateway-1
    /*—————-
    name: (Not Set) (up to 31 characters)
    LocalID: 1 (numeric)
    PrimaryGatewayID: 1 (1-255)
    PrimaryGatewayPassWord: (Not Set) (password,alphanumeric)
    PrimaryGatewayPort: 6767 (port number,default 6767)
    PrimaryGatewayIPAddr: 0.0.0.0
    SecondaryGatewayID: 2 (1-255)
    SecondaryGatewayPassWord: (Not Set) (password,alphanumeric)
    SecondaryGatewayPort: 6767 (port number,default 2525)
    SecondaryGatewayIPAddr: 0.0.0.0
    ——————*/

    -DOMain-1
    /*—————-
    name: (Not Set) (name)
    AdminContact: (Not Set) (contact information)
    Company: Quintum (company name)
    ——————*/

    -ZOne-1
    /*—————-
    name: (Not Set) (name of zone)
    AdminContact: (Not Set) (contact info for administer.)
    ——————*/

    -GateWay-1
    /*—————-
    Description: Tenor CMS Gateway (product name, max 31 char)
    OutgoingIPRouting: 0 (H323 only)
    ModemBypassRetentionHours: 168 (time,default 168)
    RemoteNAT: 0 (disabled,default)
    RTPSourceValidation: 0 (disabled,default)
    ResourceThresholdHigh: 0 (disable)
    ResourceThresholdLow: 0 (disable)
    ——————*/

    -NumberDirectories-1
    /*—————-
    ——————*/

    -BypassNumberDirectory-1
    /*—————-
    id: 1
    name: (Not Set)
    ——————*/

    -HuntLDNDirectory-pub1
    /*—————-
    id: pub1 (read only)
    name: (Not Set) (name)
    LDNType: 0 (public)
    RegisterDN: 1 (register)
    PrefixCCAC: 1 (prefix CC,AC)
    ——————*/

    -HuntLDNDirectory-prv1
    /*—————-
    id: prv1 (read only)
    name: (Not Set) (name)
    LDNType: 1 (private)
    RegisterDN: 1 (register)
    ——————*/

    -CallerIDXlationDirectory-1
    /*—————-
    id: 1
    name: (Not Set)
    ——————*/

    -InboundDNISXlationDirectory-1
    /*—————-
    id: 1
    name: (Not Set)
    ——————*/

    -InboundDNISXlationDirectory-Incoming-E1
    /*—————-
    id: Incoming-E1
    name: (Not Set)
    ——————*/

    -InboundDNISXlation-65
    /*—————-
    id: 65
    name: (Not Set)
    Pattern: 1737601* (Set number pattern)
    Replacement: 1747601 (Added digits PSTN requires)
    TON: 0 (Type of Number)
    NPI: 0 (Number Plan ID)
    Barred: 0
    ——————*/

    -HopoffNumberDirectory-1
    /*—————-
    id: 1
    name: (Not Set) (name)
    HopoffRoutingPriority: 8 (priority)
    RegisterDN: 1 (registers DNs)
    ——————*/

    -HopoffNumberDirectory-loc-Outgoing-E1
    /*—————-
    id: loc-Outgoing-E1
    name: (Not Set) (name)
    HopoffRoutingPriority: 15 (priority)
    RegisterDN: 1 (registers DNs)
    ——————*/

    -HopoffNumber-257
    /*—————-
    id: 257
    name: (Not Set)
    Pattern: 1747601 (calling pattern for country and)
    Replacement: 01 (numbers to replace in the Patt)
    NumType: 0 (public; default)
    TON: 0 (Unknown,default)
    NPI: 0 (Unknown,default)
    ——————*/

    -VoiceCodec-1
    /*—————-
    name: (Not Set) (name)
    CodecVoiceCoding: 68 (G.729AB at 8kbps)
    CodecPayloadSize: 30 (ms)
    ——————*/

    -VoiceCodec-2
    /*—————-
    name: (Not Set) (name)
    CodecVoiceCoding: 81 (G.723.1 at 6.3kbps)
    CodecPayloadSize: 30 (ms)
    ——————*/

    -VoiceCodec-3
    /*—————-
    name: (Not Set) (name)
    CodecVoiceCoding: 80 (G.723.1 at 5.3kbps)
    CodecPayloadSize: 30 (ms)
    ——————*/

    -VoiceCodec-g729
    /*—————-
    name: (Not Set) (name)
    CodecVoiceCoding: 68 (G.729AB at 8kbps)
    CodecPayloadSize: 30 (ms)
    ——————*/

    -VoiceCodec-711
    /*—————-
    name: (Not Set) (name)
    CodecVoiceCoding: 8 (G.711 A-Law)
    CodecPayloadSize: 20 (ms)
    ——————*/

    -VoiceCodec-723
    /*—————-
    name: (Not Set) (name)
    CodecVoiceCoding: 81 (G.723.1 at 6.3kbps)
    CodecPayloadSize: 30 (ms)
    ——————*/

    -VoiceCodec-4
    /*—————-
    name: (Not Set) (name)
    CodecVoiceCoding: 68 (G.729AB at 8kbps)
    CodecPayloadSize: 40 (ms)
    ——————*/

    -VoiceCodec-5
    /*—————-
    name: (Not Set) (name)
    CodecVoiceCoding: 9 (G.711 Mu-Law)
    CodecPayloadSize: 20 (ms)
    ——————*/

    -CodecProfile-default
    /*—————-
    name: (Not Set) (name)
    VoiceCodecAttached[1]: VoiceCodec-1
    VoiceCodecAttached[2]: VoiceCodec-2
    VoiceCodecAttached[3]: VoiceCodec-3
    VoiceCodecAttached[4]: VoiceCodec-g729
    VoiceCodecAttached[5]: VoiceCodec-723
    VoiceCodecAttached[6]: VoiceCodec-711
    VoiceCodecAttached[7]: VoiceCodec-5
    VoiceCodecAttached[8]: (unspecified)
    ——————*/

    -CASSignalingGroup-1
    /*—————-
    id: 1 (read only)
    name: (Not Set) (name)
    ORientation: 1 (Master, Network)
    SignalingType: 1 (Loop Start)
    RElayANI: 1 (Relay ANI)
    GuardTime: 0 (numeric,default 10 ms)
    DisconnectSupervision: 0 (disabled)
    FlashhookSignal: 0 (No)
    DisconnectToneProfileAttached: (unspecified)
    ForwardDisconnectDelay: 800 (ms delay,)
    CallerIDGeneration: 0 (disabled)
    DOutgoing-E1FONTime: 100 (50-1000ms,def 100)
    DOutgoing-E1FOFFTime: 100 (50-1000ms,def 100)
    DialMode: 0 (DOutgoing-E1F Tone Dial)
    RelayCallingNAMe: 0 (do not relay)
    ——————*/

    -ISDNSignalingGroup-1
    /*—————-
    id: 1
    name: (Not Set)
    ORientation: 0 (User; default)
    PROTocol: 0 (PRI_5ESS; default)
    DCH: 0 (default)
    L2Estab: 1 (Always;default)
    IgnoreTonNPI: 0 (Observe TON and NPI)
    RelayProgress: 1 (Yes;default)
    DefaultANI: (Not Set) (Calling party number for out bo)
    RejCallNoANI: 0 (No)
    T308: 4 (4 Secs, default)
    T310: 10 (numeric,default 30)
    OutBndBearerCap: 1 (Speech; default)
    RElayANI: 1 (Relay ANI)
    EtsiDiscNoInBand: 1 (Prog Msg separate from Disc)
    NSFFacilityCodeValue: 0 (disabled,default)
    DisconnectOnSuspend: 0 (suspend disconnect)
    UseChannelExtensionBit: 1 (use chan ext bit)
    DefaultANITON: 0 (unknown,default)
    DefaultANINPI: 0 (unknown,default)
    DefaultANIScreenInd: 0 (passthrough received)
    RelayCallingNAMe: 0 (do not relay)
    DefaultANIPresentationInd: 0 (relay ANI)
    ——————*/

    -ISDNSignalingGroup-network
    /*—————-
    id: network
    name: (Not Set)
    ORientation: 1 (Network)
    PROTocol: 5 (PRI_ETSI)
    DCH: 16 (D-Channels for E1)
    L2Estab: 1 (Always;default)
    IgnoreTonNPI: 0 (Observe TON and NPI)
    RelayProgress: 1 (Yes;default)
    DefaultANI: (Not Set) (Calling party number for out bo)
    RejCallNoANI: 0 (No)
    T308: 4 (4 Secs, default)
    T310: 10 (numeric,default 30)
    OutBndBearerCap: 1 (Speech; default)
    RElayANI: 1 (Relay ANI)
    EtsiDiscNoInBand: 1 (Prog Msg separate from Disc)
    NSFFacilityCodeValue: 0 (disabled,default)
    DisconnectOnSuspend: 0 (suspend disconnect)
    UseChannelExtensionBit: 1 (use chan ext bit)
    DefaultANITON: 0 (unknown,default)
    DefaultANINPI: 0 (unknown,default)
    DefaultANIScreenInd: 0 (passthrough received)
    RelayCallingNAMe: 0 (do not relay)
    DefaultANIPresentationInd: 0 (relay ANI)
    ——————*/

    -ISDNSignalingGroup-user
    /*—————-
    id: user
    name: (Not Set)
    ORientation: 0 (User; default)
    PROTocol: 5 (PRI_ETSI)
    DCH: 16 (D-Channels for E1)
    L2Estab: 1 (Always;default)
    IgnoreTonNPI: 0 (Observe TON and NPI)
    RelayProgress: 1 (Yes;default)
    DefaultANI: (Not Set) (Calling party number for out bo)
    RejCallNoANI: 0 (No)
    T308: 4 (4 Secs, default)
    T310: 10 (numeric,default 30)
    OutBndBearerCap: 1 (Speech; default)
    RElayANI: 1 (Relay ANI)
    EtsiDiscNoInBand: 1 (Prog Msg separate from Disc)
    NSFFacilityCodeValue: 0 (disabled,default)
    DisconnectOnSuspend: 0 (suspend disconnect)
    UseChannelExtensionBit: 0 (no chan ext bit)
    DefaultANITON: 0 (unknown,default)
    DefaultANINPI: 0 (unknown,default)
    DefaultANIScreenInd: 0 (passthrough received)
    RelayCallingNAMe: 0 (do not relay)
    DefaultANIPresentationInd: 0 (relay ANI)
    ——————*/

    -ISDNSignalingGroup-test
    /*—————-
    id: test
    name: (Not Set)
    ORientation: 0 (User; default)
    PROTocol: 5 (PRI_ETSI)
    DCH: 16 (D-Channels for E1)
    L2Estab: 1 (Always;default)
    IgnoreTonNPI: 0 (Observe TON and NPI)
    RelayProgress: 1 (Yes;default)
    DefaultANI: (Not Set) (Calling party number for out bo)
    RejCallNoANI: 0 (No)
    T308: 4 (4 Secs, default)
    T310: 10 (numeric,default 30)
    OutBndBearerCap: 1 (Speech; default)
    RElayANI: 1 (Relay ANI)
    EtsiDiscNoInBand: 1 (Prog Msg separate from Disc)
    NSFFacilityCodeValue: 0 (disabled,default)
    DisconnectOnSuspend: 0 (suspend disconnect)
    UseChannelExtensionBit: 1 (use chan ext bit)
    DefaultANITON: 0 (unknown,default)
    DefaultANINPI: 0 (unknown,default)
    DefaultANIScreenInd: 0 (passthrough received)
    RelayCallingNAMe: 0 (do not relay)
    DefaultANIPresentationInd: 0 (relay ANI)
    ——————*/

    -SS7SignalingGroup-1
    /*—————-
    id: 1
    name: (Not Set) (up to 31 char)
    DelayACM: 1 (Wait for alerting)
    OutBndBearerCap: 1 (Speech,default)
    DefaultANI: (Not Set) (Phone number)
    DefaultANITON: 0 (Unknown,default)
    DefaultANINPI: 1 (ISDN/Telephony,default)
    DefaultANIScreenInd: 0 (passthrough received)
    DefaultANIPresentationInd: 0 (relay ANI)
    RejCallNoANI: 0
    RelayANI: 1 (Relay ANI)
    CallingCategory: 10 (Ordinary subscriber,default)
    IgnoreTonNPI: 0 (TON and NPI)
    PROTocol: 1 (ITU ISUP 1992)
    ——————*/

    -SIPSignalingGroup-1
    /*—————-
    SIPInfoFormat: 0 (Nortel,default)
    ProxyFailoverBehavior: 1 (fail over)
    PrimarySIPServerPort: 5060 (portnumber,def 5060)
    PrimarySIPServer: 0.0.0.0 (IP address)
    SecondarySIPServerPort: 5060 (port number,def 5060)
    SecondarySIPServer: 0.0.0.0 (IP address)
    OutboundPrimaryServerPort: 5060 (port number,def 5060)
    OutboundPrimaryServer: (Not Set) (IP address)
    OutboundSecondaryServerPort: 5060 (port number,def 5060)
    OutboundSecondaryServer: (Not Set) (IP address)
    RegisterExpiryTime: 300 (seconds,def 300)
    AllowOnlyProxyCalls: 0 (all calls)
    SDPin180Ringing: 1 (send SDP)
    SIPServerInFromHdr: 1 (use SIP Server IP)
    SDPin183Progress: 1 (yes,default)
    IncludeQuintumHeader: 1 (enable,default)
    UserNameInContact: 1 (contact info sent)
    RequestReTransmitCount: 11 (default 11)
    UserNameAsURI: 0 (disable,default)
    MaxForwards: 70 (default 70)
    PRACKMethod: 1 (supported)
    Send180Ringing: 1 (enabled)
    Send183Progress: 1 (enabled)
    SipPstnInterworking: 0 (disabled)
    SIPNoConnectTimeout: 180 (seconds,def 180)
    SessionTimer: 0 (disabled)
    UserAgentHeader: Quintum/1.0.0 (0-31 char,def Quintum1.0.0)
    MWIServer: (Not Set) (IP address)
    MWIServerPort: 5060 (Numeric,default 5060)
    MWISubscribeDuration: 60 (minutes,def 60)
    MWIFailureRetryDelay: 30 (minutes,def 30)
    CLIHeaderType: 0 (disabled)
    UseFromContact: 0 (DN)
    SIPTelephoneEvents: 1 (Append “/1” to SDP attribute)
    SIPUseDNinRegister: 0 (Use PrimaryUser in Register)
    DirectGWRouting: 0 (disable)
    ConferenceFactoryName: (Not Set) (0-31 charac,name)
    ConferenceFactoryServer: (Not Set) (server name)
    ConferenceFactoryPort: 5060 (port num, def 5060)
    SIPRegisterOnBootup: 0 (disable)
    SDPinInvite: 1 (send SDP)
    ——————*/

    -UserAgent-101
    /*—————-
    id: 101
    Enabled: 1 (enabled)
    ListenPort: 5060 (port,default 5060)
    PrimaryUser: (Not Set) (username)
    PrimaryPassWord: (Not Set) (up to 31 char)
    SecondaryUser: (Not Set) (username)
    SecondaryPassWord: (Not Set) (up to 31 char)
    Contacts[1..2]: (Not Set)
    MWIUserName: (Not Set) (name,15 char)
    MWIPassword: (Not Set) (password,15 char)
    ——————*/

    -H323SignalingGroup-1
    /*—————-
    PrimaryGateKeeperIPAddr: 0.0.0.0
    SecondaryGateKeeperIPAddr: 0.0.0.0
    GRQPrimaryGK: 0 (No, do not allow)
    GRQSecondaryGK: 0 (No, do not allow)
    RegisterDN: 1 (GW Prefixes)
    RelayProgress: 1 (Yes,default)
    IgnoreGrantedBandwidth: 0 (No, not ignore)
    DefaultH245Tunneling: 0 (No,disabled;default)
    H323ID: (Not Set) (Alphnum string,1-31)
    TimeOutRIP: 5 (seconds)
    LightWeightRRQ: 0 (Disable LwRRQ; default)
    GateWayType: 0 (H323 GW; default)
    UsePartyNumber: 0 (Off)
    EarlyH245: 0 (sent after connect)
    StartH245Collision: 0 (H245 not by spec)
    IgnoreFSifH245Addr: 0 (default;does Faststart)
    MediaAfterConnect: 0 (default; opens H245 immediately)
    CRDoInboundARQ: 1 (enables inbound ARQ)
    AutoExtIP: 0 (disable)
    DirectGWRouting: 0 (disabled)
    REServed: 0 (user specific)
    AllowURQ: 1 (enabled)
    RTPVerify: 0 (disabled)
    RRQInterval: 0 (0-65535,0 default)
    H245TimerVal: 4 (Seconds)
    RRQV3Plus: 0 (Don’t use V3 plus)
    MuxCAPability: 0 (Disabled)
    ——————*/

    -TrunkCircuitRoutingGroup-1
    /*—————-
    id: 1
    name: (Not Set)
    OverlapDial: 0 (No, default)
    DIRection: 1 (Outgoing)
    ProgressTone: 0 (Off;default)
    EndOfDial: 1 (Enable)
    EndOfDialDigit: # (default;#,*,0-9)
    AddEndOfDialDigit: 0 (No;default)
    ForcedRoutingNum: (Not Set) (A Dialed Number)
    ForcedRoutingNumType: 0 (Public; default)
    TrunkID: (Not Set) (Numeric string)
    TrunkIDDelivery: 0 (No Delivery)
    TrunkIDDeliveryFormat: (Not Set) (0-9,*,#,literal character)
    HUNTAlgorithm: 3 (Descending-Round-Robin)
    ModemBypass: 0 (Disabled)
    PassThroughEnable: 0 (No; default)
    PassThroughID: 0 (Idx of a LCRG;default)
    MaxHopoffCallsAllowed: -1 (default)
    BusyOut: 0 (Ring Back)
    TwoStageDialing: 0 (No)
    IVRType: 0 (No IVR; default)
    Hairpinning: 0 (No,Default)
    EnableExternalRouting: 0 (No; Default)
    MaxTalkTime: 0 (Mins,default 0)
    InBoundAccessLevel: 0 (0 to 127)
    OutBoundAccessLevel: 0 (0 to 127)
    StopAcctID: 0 (IP Addr,default)
    CallerIDType: 0 (Caller ID)
    Play1700Prompt: 0 (No;Default)
    PrefiXTrunkID: 0 (No;Default)
    AnswerDisconnectTone: 0 (disabled,default)
    OutboundANINumDigits: 0 (caller id sent out)
    OutboundCallDetectionEnable: 0 (disable,default)
    CallTerminationINDication: 0 (disable)
    CallWaiting: 0 (disable)
    HolD: 0 (disable)
    UnattendedTRansfer: 0 (disable)
    AttendedTRansfer: 0 (disable)
    CallWaitToConfKeystroke: 22 (keystroke,def 22)
    HopoffNumberDirAttached[1]: HopoffNumberDirectory-1
    HopoffNumberDirAttached[2]: HopoffNumberDirectory-gideon
    HopoffNumberDirAttached[3..32]: (unspecified)
    UserAgentAttached: (unspecified)
    CallerIDXlateDirAttached: (unspecified)
    OutboundCallerIDXlateDirAttach: (unspecified)
    InboundDNISXlateDirAttached: (unspecified)
    ——————*/

    -TrunkCircuitRoutingGroup-Outgoing-E1
    /*—————-
    id: Outgoing-E1
    name: (Not Set)
    OverlapDial: 1 (Yes)
    DIRection: 2 (Bi-direction;default)
    ProgressTone: 0 (Off;default)
    EndOfDial: 1 (Enable)
    EndOfDialDigit: # (default;#,*,0-9)
    AddEndOfDialDigit: 0 (No;default)
    ForcedRoutingNum: (Not Set) (A Dialed Number)
    ForcedRoutingNumType: 0 (Public; default)
    TrunkID: (Not Set) (Numeric string)
    TrunkIDDelivery: 0 (No Delivery)
    TrunkIDDeliveryFormat: (Not Set) (0-9,*,#,literal character)
    HUNTAlgorithm: 2 (Ascending-Round-Robin)
    ModemBypass: 0 (Disabled)
    PassThroughEnable: 0 (No; default)
    PassThroughID: 0 (Idx of a LCRG;default)
    MaxHopoffCallsAllowed: -1 (default)
    BusyOut: 0 (Ring Back)
    TwoStageDialing: 0 (No)
    IVRType: 0 (No IVR; default)
    Hairpinning: 0 (No,Default)
    EnableExternalRouting: 0 (No; Default)
    MaxTalkTime: 0 (Mins,default 0)
    InBoundAccessLevel: 0 (0 to 127)
    OutBoundAccessLevel: 0 (0 to 127)
    StopAcctID: 0 (IP Addr,default)
    CallerIDType: 0 (Caller ID)
    Play1700Prompt: 0 (No;Default)
    PrefiXTrunkID: 0 (No;Default)
    AnswerDisconnectTone: 0 (disabled,default)
    OutboundANINumDigits: 0 (caller id sent out)
    OutboundCallDetectionEnable: 0 (disable,default)
    CallTerminationINDication: 0 (disable)
    CallWaiting: 0 (disable)
    HolD: 0 (disable)
    UnattendedTRansfer: 0 (disable)
    AttendedTRansfer: 0 (disable)
    CallWaitToConfKeystroke: 22 (keystroke,def 22)
    HopoffNumberDirAttached[1]: HopoffNumberDirectory-loc-Outgoing-E1
    HopoffNumberDirAttached[2..32]: (unspecified)
    UserAgentAttached: (unspecified)
    CallerIDXlateDirAttached: (unspecified)
    OutboundCallerIDXlateDirAttach: (unspecified)
    InboundDNISXlateDirAttached: (unspecified)
    ——————*/

    -TrunkCircuitRoutingGroup-Incoming-E1
    /*—————-
    id: Incoming-E1
    name: (Not Set)
    OverlapDial: 1 (Yes)
    DIRection: 0 (Incoming)
    ProgressTone: 0 (Off;default)
    EndOfDial: 1 (Enable)
    EndOfDialDigit: # (default;#,*,0-9)
    AddEndOfDialDigit: 0 (No;default)
    ForcedRoutingNum: (Not Set) (A Dialed Number)
    ForcedRoutingNumType: 0 (Public; default)
    TrunkID: (Not Set) (Numeric string)
    TrunkIDDelivery: 0 (No Delivery)
    TrunkIDDeliveryFormat: (Not Set) (0-9,*,#,literal character)
    HUNTAlgorithm: 2 (Ascending-Round-Robin)
    ModemBypass: 0 (Disabled)
    PassThroughEnable: 0 (No; default)
    PassThroughID: 0 (Idx of a LCRG;default)
    MaxHopoffCallsAllowed: -1 (default)
    BusyOut: 0 (Ring Back)
    TwoStageDialing: 0 (No)
    IVRType: 0 (No IVR; default)
    Hairpinning: 0 (No,Default)
    EnableExternalRouting: 0 (No; Default)
    MaxTalkTime: 0 (Mins,default 0)
    InBoundAccessLevel: 0 (0 to 127)
    OutBoundAccessLevel: 0 (0 to 127)
    StopAcctID: 0 (IP Addr,default)
    CallerIDType: 0 (Caller ID)
    Play1700Prompt: 0 (No;Default)
    PrefiXTrunkID: 0 (No;Default)
    AnswerDisconnectTone: 0 (disabled,default)
    OutboundANINumDigits: 0 (caller id sent out)
    OutboundCallDetectionEnable: 0 (disable,default)
    CallTerminationINDication: 0 (disable)
    CallWaiting: 0 (disable)
    HolD: 0 (disable)
    UnattendedTRansfer: 0 (disable)
    AttendedTRansfer: 0 (disable)
    CallWaitToConfKeystroke: 22 (keystroke,def 22)
    HopoffNumberDirAttached[1..32]: (unspecified)
    UserAgentAttached: (unspecified)
    CallerIDXlateDirAttached: (unspecified)
    OutboundCallerIDXlateDirAttach: (unspecified)
    InboundDNISXlateDirAttached: InboundDNISXlationDirectory-Incoming-E1
    ——————*/

    -LineCircuitRoutingGroup-1
    /*—————-
    id: 1
    name: (Not Set)
    OverlapDial: 0 (No)
    DIRection: 2 (Bi-dir; default)
    ProgressTone: 1 (On;default)
    EndOfDial: 1 (Enable)
    EndOfDialDigit: # (default;#,*,0-9)
    AddEndOfDialDigit: 0 (No; default)
    ForcedRoutingNum: (Not Set) (A Dialed Number)
    ForcedRoutingNumType: 0 (Public; default)
    TrunkID: (Not Set) (Numeric String)
    TrunkIDDelivery: 0 (No Delivery; default)
    TrunkIDDeliveryFormat: (Not Set) (Original Destination Num)
    HUNTAlgorithm: 2 (Ascending-Round-Robin)
    ModemBypass: 0 (Disabled)
    PassThroughEnable: 0 (No; default)
    PassThroughID: 0 (Index of a LCRG; default)
    PUBlicTON: 0 (Unknown; default)
    PUBlicNPI: 0 (Unknown; default)
    PRIVateTON: 0 (Unknown; default)
    PRIVateNPI: 0 (Unknown; default)
    PUBlicNumDigits: 7 (default)
    PRIVateNumDigits: 4 (default)
    TwoStageDialing: 0 (No, default)
    EnableMultiPath: 1 (Yes, default, enable multi path)
    IVRType: 0 (No IVR; default)
    EnableExternalRouting: 0 (No; Default)
    InBoundAccessLevel: 0 (Access level, 0 to 127)
    OutBoundAccessLevel: 0 (Access level, 0 to 127)
    StopAcctID: 0 (IP Addr, default)
    CallerIDType: 3 (CallID or area+LDN)
    Play1700Prompt: 0 (No;Default)
    PrefiXTrunkID: 0 (No;Default)
    AnswerDisconnectTone: 0 (disabled,default)
    OutboundANINumDigits: 0 (caller id sent out)
    OutboundCallDetectionEnable: 0 (disable,default)
    PartialTG: 0 (disabled,default)
    CallTerminationINDication: 0 (disable)
    CallWaiting: 0 (disable)
    HolD: 0 (disable)
    UnattendedTRansfer: 0 (disable)
    AttendedTRansfer: 0 (disable)
    CallWaitToConfKeystroke: 22 (keystroke,def 22)
    BypassNumberDirAttached[1]: BypassNumberDirectory-1
    BypassNumberDirAttached[2..8]: (unspecified)
    PUBHuntLdnDirAttached[1]: HuntLDNDirectory-pub1
    PUBHuntLdnDirAttached[2..4]: (unspecified)
    PRIVHuntLdnDirAttached[1]: HuntLDNDirectory-prv1
    PRIVHuntLdnDirAttached[2..4]: (unspecified)
    UserAgentAttached: (unspecified)
    CallerIDXlateDirAttached: (unspecified)
    OutboundCallerIDXlateDirAttach: (unspecified)
    InboundDNISXlateDirAttached: (unspecified)
    ——————*/

    -FaxProfile-1
    /*—————-
    FaxMaxRate: 144 (14400 bps)
    FaxNominalDelay: 200 (ms,default 200ms)
    FaxInactivityTimeOut: 20 (20 seconds)
    ——————*/

    -IPRoutingGroup-default
    /*—————-
    name: (Not Set)
    TrunkID: (Not Set)
    VADEnable: 0 (Disable silence suppression)
    IdleNoiseLevel: -7000 (times 0.01 dbm)
    RxGain: 2 (db)
    TxGain: 2 (db)
    DigitRelayH323: 1 (out-of-band H245 Alpha)
    PacketSaverEnabled: 0 (Disable Packet saver)
    MaxIncomingCallsAllowed: -1 (UnLimited)
    EnableExternalRouting: 0 (Default; Disabled)
    MaxOutgoingCallsAllowed: -1 (UnLimited)
    MaxTalkTime: 0 (Mins)
    InBoundAccessLevel: 0 (Access level between 0 and 127)
    OutBoundAccessLevel: 0 (Access level, 0 to 127)
    StopAcctID: 0 (IP Addr; Default)
    ForceProgIEAlert: 1 (Yes)
    DigitRelaySIP: 3 (out-of-band RFC2833)
    RElayANI: 1 (Relay ANI)
    DefaultANI: (Not Set) (Calling party number for out bo)
    T303: 4 (seconds; default 4)
    TCPOutboundConnectTimer: 3 (seconds,default 3)
    IVRType: 0 (Disabled)
    IgnoreTonNpi: 0 (Observe TON and NPI)
    MediaQOSType: 0 (TOS)
    MediaQOSValue: b0 (0x00-0xFE)
    InbandTone: 1 (yes; default)
    FaxRelay: 1 (T.38 W/O Fallback – Default)
    FaxModemCoding: 0 (disabled;default)
    T38LSDataRedundancy: 3 (number of packets)
    T38HSDataRedundancy: 0 (default)
    TCFHandlingMethod: 2 (network)
    ECM: 0 (disabled)
    AllowMRPageCompression: 0 (disabled)
    DefaultANITON: 0 (unknown,default)
    DefaultANINPI: 0 (unknown,default)
    TCPInboundConnectTimer: 2 (seconds,2-10)
    DisableFS: 0 (FastStartEnabled,default)
    SIPDigitRelayPayloadType: 101 (numeric,default 101)
    DefaultANIScreenInd: 0 (passthrough received)
    RelayCallingNAMe: 0 (do not relay)
    T310: 30 (numeric,default 30)
    DefaultANIPresentationInd: 0 (relay ANI)
    RejCallNoANI: 0 (No)
    CodecProfileAttached: CodecProfile-default
    IPDialPlanAttached: IPDialPlan-default
    CallerIDXlateDirAttached: (unspecified)
    InboundDNISXlateDirAttached: (unspecified)
    OutboundCallerIDXlateDirAttach: (unspecified)
    ——————*/

    -ToneProfile-1
    /*—————-
    id: 1
    name: (Not Set)
    DiscToneFreq1: 480 (100-2000 Hz,default 480 Hz)
    DiscToneFreq2: 620 (100-2000 Hz,default 600 Hz)
    DiscToneONTime: 250 (0-2000 ms, default 0 ms)
    DiscToneOFFTime: 250 (0-2000 ms, default 0 ms)
    ——————*/

    -DNChannelMap-1
    /*—————-
    ——————*/

    -GateKeeperParam-1
    /*—————-
    RegistrationPort: 1719 (RAS Port)
    GKListeningPort: 1718 (GK Discovery Port)
    PrimaryBEIPAddr: 0.0.0.0
    SecondaryBEIPAddr: 0.0.0.0
    ZoneName: (Not Set) (Up to 31 Chars)
    PassWord: (Not Set) (Alphanumeric string)
    EPRadiusAuthorization: 0 (No;default)
    MaxLRQHops: 3 (Hops)
    LRQLdnOnly: 0 (All routes; default)
    EnableExtRouting: 0 (No;default)
    GateKeeperID: 0 (Integer ID)
    LCFLRJV3Plus: 1 (default; Yes)
    EnableBEExtRegistrations: 1 (BE On)
    UseIPHeader: 0 (Disabled)
    UseSecondaryBE: 0 (Disabled)
    ——————*/

    -EndPointAddressDirectory-1
    /*—————-
    ——————*/

    -QOSPolicy-1
    /*—————-
    AutoSwitchThreshold: 50 (Tenths % packet loss,)
    ——————*/

    -RouteDirectory-1
    /*—————-
    ——————*/

    -StaticRoute-1
    /*—————-
    id: 1
    name: (Not Set)
    CallSignalIP: 0.0.0.0
    Registered: 0 (default for BE)
    GKMode: 0 (Gateway)
    IPRoutingGroupAttached: IPRoutingGroup-default
    ——————*/

    -USer-admin
    /*—————-
    name: (Not Set) (name)
    ContactInfo: (Not Set) (contact information)
    Login: admin (user)
    LastLogin: XXXX
    ——————*/

    -USer-user
    /*—————-
    name: (Not Set) (name)
    ContactInfo: (Not Set) (contact information)
    Login: user (user)
    LastLogin: XXXX
    ——————*/

    Tenor CMS

    ———————————————————————————————————————————–
    Card Type HW Type Slot SW Date SW Ver
    ———————————————————————————————————————————–
    Tenor CMS Bootcode Series-2 1 Mar 20 2006, 17:02:46 v2.16
    Tenor CMS System Controller Series-2 1 May 06 2009, 13:52:49 P107-09-00
    Tenor CMS 8-Span DS1 Card Series-2 05 06 07 08 Mar 16 2009, 13:51:53 P107-08-00
    Tenor CMS 120-Channel DSP Module Series-2 05 05 06 06 07 07 08 08 Apr 17 2009, 12:34:51 P107-09-00

    H323 Module: 3.1.1
    SIP Module: 2.1.0

    Serial Number: B001-081790

    Number of Slots : 8

    Cli Error file version is 1.32
    Cli Help file version is 1.168
    Cli Object file version is 1.20

    Slot dev CardType NAC NIC
    —————————–
    1 1 System 2 4
    5 1 DS1 1 3
    5 2 DSP 1
    5 3 DSP 1
    6 1 DS1 1 3
    6 2 DSP 1
    6 3 DSP 1
    7 1 DS1 1 3
    7 2 DSP 1
    7 3 DSP 1
    8 1 DS1 1 3
    8 2 DSP 1
    8 3 DSP 1

    Database Version: DB_CMS_M14_A018_V12.0.0_121107

    Quintum#

Viewing 15 posts - 1 through 15 (of 20 total)
Reply To: ARJ PROBLEM
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">