- This topic has 31 replies, 1 voice, and was last updated 15 years, 3 months ago by SAG.
-
AuthorPosts
-
6th August 2005 at 08:35 #29920AhamedGuest
Can anybody tell me how can I receover my AudioCodes MP-104 login password ?? I’ve tried with the reset pin, but, it’ doesn’t work.
9th September 2005 at 13:54 #29921lambdanetGuestHi Ahamed,
the best way to reset the password is to use the INI-File. After power on the MPs send 3 BootP/TFTP requests. The parameter for the INI-File is: ResetWebPassword thats all. Use your standard INI-File, add this string, after the system reset you can use Admin/Admin for login. To do this with the reset button you need the Firmware 4.4GA (also some special versions 4.2GA).
lambdanet
20th September 2005 at 17:36 #29922AhamedGuestThank you so much lambdanet … it works finally …
11th November 2005 at 13:32 #29923JemuGuestI think that the default IP address after a reset is 10.1.10.10 with username/password as admin/admin.
20th March 2006 at 16:49 #29924SunnyGuestcan anybody tell me how can i remove the echo from remote side
28th March 2006 at 07:58 #29925baiGuesthi
It is very simple reset device
then ip : 10.1.10.10
user : admin
pass ; adminfor informationn: symphony_talk@yahoo.com
12th April 2006 at 11:45 #29926AudioCodes Username/passwordGuestI have a AudioCodes, MP-108. I have configured, assinged a static-IP, but when ever i try it on my browser, http://audiocodes_ip it asks for a username/password. Is there any default username password that i can try. I tried admin/admin, it didnt work. Can anyone tell me how we can set the username/password for this ?
Pls let me know.
Thanks,
Prashanth13th April 2006 at 18:12 #29927sunnyGuesthi prashanth,
user name will be Admin and pwd will be also Admin….where A is in Caps
19th April 2006 at 15:11 #29928PrashanthGuestSunny, you the man… 🙂
its working..Thanks BuddyCheers
Prashanth20th April 2006 at 14:13 #29929audio-codes m-108GuestI have my office land-phone connected to Audio-codes (m-108), whenever i dial any number, I get this — ” You account has been temporarly unavailable.blah blah”
So, earlier (before I was using Audio-Codes)i used to dial a ‘0’ to get dialtone, then i dial the number.. however after connecting the audiocds, when i dial ‘0’ – i get ..your account temporarly unaviable..
whats the work around, if some one can help me, that wud be great.
Thanks,
Prashanth20th April 2006 at 19:13 #29930sunnyGuesthi prashant
first of all u chk wid ur VoIP provider ….this response means might be ur sevice has been deactivated……
13th December 2006 at 09:41 #29931ChristoffelGuestCan anybody tell me how can I recover MP-124 login password ?? I’ve tried to put ResetWebPassword or ResetWebPassword = 1 in standar INI-file, then load this by Audiocodes bootp server and I saw it is loaded, but when I put username/password Admin/Admin for login in , it did not work.
21st March 2007 at 14:14 #29932amitchhabraGuesthi i want to reset my audiocode password for mp-124
the id is :admin
and i have been forgoton password so please help meout
24th March 2007 at 20:35 #29933FramedRelayGuestAdmin/Admin should work – cauz thats the default.
4th July 2007 at 07:48 #29934RahulGuestHI Everyone,
Is there any way so that we can retrive the password of audiocodes MP104 FXS without actually resetting the box.
I do not want to loose the configuration in the box.
Help ne out …?
-
AuthorPosts
- The forum ‘Voice over IP’ is closed to new topics and replies.