- This topic has 204 replies, 1 voice, and was last updated 16 years, 3 months ago by Rabin Manandhar.
-
AuthorPosts
-
29th October 2004 at 03:04 #23105Jun AdolfsGuest
I have a quintum box, i set back into the factory default settings.
The problem now is i forgot the password? because when the time that i set into the the factory default settings the password which i registered is totally errased.
Then now they ask for the factory default password? Pls help me to figured out this thing so that i can continue to configure my A800 box…. Thanks everyone…
4th November 2004 at 06:24 #23106Umesh JoshiGuestRespcted Sir,
I want to setup with Qutium Tenor-A 800 with Cisco1751 router having VIC-2FXS card for the point to multi-point connectivity .
In thses setup All other site have cisco unit only one uint of the Tenor A-800 can be use in the setup .
so pls give me the config example for the same.
10th November 2004 at 23:42 #23107bertcamroyGuestadolfs if dont panic the pw is just infront of you the same as the log in. “admin”
hope this solves your problem 🙂
have a nice day11th November 2004 at 10:07 #23108kevinGuestHi
I am trying to make an A800 to register with a border element over internet. The Borderelement has a static public ip address.
How should i configure the a800 to use auto external ip for be registration and how should i configure the the borderelement to use ip header for request registrationThanks
15th November 2004 at 04:19 #23109MikeGuestKevin,
Check out Quintum’s web site for this information. There are 2 documents that should help you. They can be found at;
http://www.quintum.com/support/xplatform/network/Auto_External_IP.pdf
or
http://www.quintum.com/support/1G/sysdoc/webhelp/autoextip.htm
7th December 2004 at 12:28 #23110walid Ahmed KamalGuesti need solution for how i can configure the ip telephone with Isa server
gateway model is : D-Link 104sh
step by step9th December 2004 at 01:27 #23111NolieGuestHow can i change IP address for TENOR DX series? please help, Thanks.
10th December 2004 at 15:06 #23112CooreyGuestHi,
Quitum TenorA800
================
Pls. assist me with the following;1. Need to know whether I can Block CLI if yes the procedure.
2. A link where I can download a Free copy of a CDR server software.
3. Whether I can couple two A800 with one IP and have it as a 16-port operation.
Pls. help
Thnx,
Coorey10th December 2004 at 15:18 #23113AllanGuestAnybody wants to help me. I forgot the password of my AXT2400 how can i login and restore my password so that i can use my quintum…..
23rd December 2004 at 22:05 #23114wickyGuesthello mates
i wana configure Cisco ATA 186 as a client for Quintum ( Tenor A800 )
i have been searched all over ip forems and help sites but nothing help full, plz let me know if some one have configured ATA 186 as a client for Quintem Tenor A800 ,
thanks in advance24th December 2004 at 05:31 #23115NonameGuestAll what you need to do is point the ATA to the Quintum.
Enter the I.P. of the Quintum gateway on the filed called “gateway”.
Be sure that you are using H323 on the ATA (use sip=no), and clear out the gatekeeper/proxy field.If you need a sample of the ATA configuration, write to mike3799@yahoo.com
Best regards.
24th January 2005 at 09:52 #23116MichelGuestHi i need the step by step configuration between Quintum AS 400 and Netmeeting. Blue Lava if u have it can u send it to me?
24th January 2005 at 11:37 #23117sekharGuestHi
I know VoIP but i dont know how to setup and configuration.
Please any body please send notes on
1. what are the different ways to setup VoIP
2. various kinds of equipments
3. configurationif u send to my email ID, grateful to u AS SOON AS POSSIBLE.
PLEASE…………….22nd February 2005 at 04:28 #23118AndyGuestI have a Quintum Tenor AS400 and I need to know how to configure it to run SIP. Any help would be greatly appreciated!!
1st April 2005 at 14:55 #23119DanieleGuestHi..I’m a student of engineerig university of Palermo ITALY..Could someone send me some web sites or work paper or anything else about IP BORDER ELEMENT?..HELP ME PLEASE..Thanks ..
-
AuthorPosts
- The forum ‘Voice over IP’ is closed to new topics and replies.