[Jun Adolfs]

I have a quintum box, i set back into the factory default settings.

The problem now is i forgot the password? because when the time that i set into the the factory default settings the password which i registered is totally errased.

Then now they ask for the factory default password? Pls help me to figured out this thing so that i can continue to configure my A800 box…. Thanks everyone…

[Umesh Joshi]

Respcted Sir,

I want to setup with Qutium Tenor-A 800 with Cisco1751 router having VIC-2FXS card for the point to multi-point connectivity .

In thses setup All other site have cisco unit only one uint of the Tenor A-800 can be use in the setup .

so pls give me the config example for the same.

[bertcamroy]

adolfs if dont panic the pw is just infront of you the same as the log in. “admin”

hope this solves your problem 🙂
have a nice day

[kevin]

Hi

I am trying to make an A800 to register with a border element over internet. The Borderelement has a static public ip address.
How should i configure the a800 to use auto external ip for be registration and how should i configure the the borderelement to use ip header for request registration

Thanks

[Mike]

Kevin,

Check out Quintum’s web site for this information. There are 2 documents that should help you. They can be found at;

http://www.quintum.com/support/xplatform/network/Auto_External_IP.pdf

or

http://www.quintum.com/support/1G/sysdoc/webhelp/autoextip.htm

[walid Ahmed Kamal]

i need solution for how i can configure the ip telephone with Isa server

gateway model is : D-Link 104sh
step by step

[Nolie]

How can i change IP address for TENOR DX series? please help, Thanks.

[Coorey]

Hi,

Quitum TenorA800
================
Pls. assist me with the following;

1. Need to know whether I can Block CLI if yes the procedure.

2. A link where I can download a Free copy of a CDR server software.

3. Whether I can couple two A800 with one IP and have it as a 16-port operation.

Pls. help

Thnx,
Coorey

[Allan]

Anybody wants to help me. I forgot the password of my AXT2400 how can i login and restore my password so that i can use my quintum…..

[wicky]

hello mates
i wana configure Cisco ATA 186 as a client for Quintum ( Tenor A800 )
i have been searched all over ip forems and help sites but nothing help full, plz let me know if some one have configured ATA 186 as a client for Quintem Tenor A800 ,
thanks in advance

[Noname]

All what you need to do is point the ATA to the Quintum.

Enter the I.P. of the Quintum gateway on the filed called “gateway”.
Be sure that you are using H323 on the ATA (use sip=no), and clear out the gatekeeper/proxy field.

If you need a sample of the ATA configuration, write to mike3799@yahoo.com

Best regards.

[Michel]

Hi i need the step by step configuration between Quintum AS 400 and Netmeeting. Blue Lava if u have it can u send it to me?

[sekhar]

Hi

I know VoIP but i dont know how to setup and configuration.

Please any body please send notes on
1. what are the different ways to setup VoIP
2. various kinds of equipments
3. configuration

if u send to my email ID, grateful to u AS SOON AS POSSIBLE.
PLEASE…………….

[Andy]

I have a Quintum Tenor AS400 and I need to know how to configure it to run SIP. Any help would be greatly appreciated!!

[Daniele]

Hi..I’m a student of engineerig university of Palermo ITALY..Could someone send me some web sites or work paper or anything else about IP BORDER ELEMENT?..HELP ME PLEASE..Thanks ..

[Author]

Posts