- This topic has 409 replies, 1 voice, and was last updated 13 years, 11 months ago by Dude.
11th October 2005 at 07:36 #34083AleemGuest
Thanks for the suggestion, actually I had a dead line to meet (8th oct). But surely I would like to know more about the tools SOLINET has to offer. I shall be sending an email to those email ids.
I am working at ACES co ltd, Saudi Arbia. We are Consultancy company and we often receive lot of request for tools related to Mobile communication.
Aleem13th October 2005 at 05:56 #34084SandoshakGuest
Dear All , Sorry for not keepin in touvh for so long as I was out of country!
for ::SONIA :::
As far as i can see , The Future of Telecom Switching is ALL IP based Switches! SO better make a project based upon SIP or H323 Voice Over IP based call networks.
Sandoshak21st October 2005 at 02:56 #34085JhengGuest
Im jheng from a telecommunication company, I want to know more about the traffic dimensioning parameters and calculations specifically in CDMA 2000 1X and CDMA EV-DO. I would greatly appreciate if you could explain or send me some materials regarding the said topic. Thanks.24th October 2005 at 08:24 #34086sonia gehlotGuest18th November 2005 at 13:57 #34087HammadGuest
I am working as NSS planning engineer in one of gsm operator. i want to know how IN loop works in Siemens MSC and what is the solution if they got congested.26th November 2005 at 15:17 #34088Itz MeGuest
@ Hammad U dont know wat is IN loop…30th November 2005 at 18:30 #34089kellyGuest
HELLO ALL, I AM INDEED VERY HAPPY FOR GETTING TO KNOW THIS FORUM,AND I WANT TO USE THIS OPPOURTUNITY TO FIND OUT INFO ON THE FOLLOWING:
ERICSSON AXE 10, 810 AND SIEMENS EWSD, ZTE ZGE 10, ALCATEL SYSTEM X, AND MOTOROLA SWITCHES.
PLS PALS I WILL NEED INFO OR WEBSITES TO GET THIS INFO. ON THESE SWITCHES ASAP.
KELLY.5th December 2005 at 23:30 #34090RapidoGuest
hi, i am working at a local GSM operator.. i would like to know more about Nortel switches.. especially MML commands for Roaming parameter handling.. anybody who cud help? i would greatly appreciate it.. thanks much..:-)9th December 2005 at 07:45 #34091KhamesGuest
My name Khames,
Can anyone could explain to me regarding the different between bandwidth capacity in TDM (such 2MBPS) and in Ethernet ( 10mbps).
Thanks21st December 2005 at 11:22 #34092VivekGuest
Hello everybody can anyone explain me difference MSSP ring and SNCP ring in SDH.
Pleaseeeee27th December 2005 at 14:11 #34093AanshikGuest
I am a Telecom engg student and pursuing my final semester training at Reliance Infocomm.
Can anyone pls give me names of sites or info. on Ericsson AXE-10 switch?I desperately need it.
Thank u very much28th December 2005 at 05:19 #34094DeivaGuest
can anybody help me for description of (AXE10 & APZ 21230)of ericsson switch series.let me know where can i get the material for this
my id is firstname.lastname@example.org
Deiva M.28th December 2005 at 05:46 #34095RameshGuest
This for Vivek:
SNCP and MSSP are the protections schemes in SDH.
SNCP – SubNetwork Connection Protection –> is a dedicated protection mechanism that can be used to protect a protion of a path (between two NE) or the full end-to-end path.
MSSPRing – Multiplex Section Shared Protection (could be 2Fibre or 4Fibre) Ring –> In this mode, instead of one section, the whole ring is duplicated (both Tx and Rx) in order to have protection. By doing so, the equipments effective usable capacity will be reduced to half.
if you need more, try to read some white papers, articles or the main source ITU-T recommendation G841 – protection structures. The ITU-T paper is not a free one.28th December 2005 at 06:01 #34096RavindraGuest
Can someone tell me where I can find details regarding GSM Antenna. (Introduction to GSM Antenna)28th December 2005 at 10:59 #34097NILESH JOSHIGuest
I am working as a switch engineer in the telecom company.I want
to increase my scope of knowledge by Learning some basic things about
ericsson switch I will be highly obliged if you can send me some material or forthat matter suggest me some website or any available books in the market,that will help me out in understanding the basic concept of ericsson switch
eg: what paramters govern
the switch capacity, how a switch reacts to overload conditions,what isloadA and LoadB…..harware limitations, signalling imitations etc
also give me the basic question for interview purpose