Generic selectors
Exact matches only
Search in title
Search in content

RX Diversity Alarm

Viewing 4 posts - 61 through 64 (of 64 total)
  • Author
  • #49108 Reply

    hi Ali you have to check in omt rx bath level . 2-when they swap antenna they or rbs they have swap between jumper -3 vswr case this problem -4 in omt when you but fault u can see which antenna making red- 5 check all dug may be they swap jumper between 900 and 1800 any information let me know

    #49109 Reply
    Thant Zin Htun

    1.How to clear the RX Path alarm permanently?
    (Normally we checked the physical condition, Jumper Cable conditions, bending shape, if we can’t also replaced by RRU and new Jumper cables but not cleared permanently).
    2.How to resolve the RX Diversity lost alarm?

    3.Why does appear the VSWR limited exceed alarm when using(U900+2G) at the one RRU?

    #49110 Reply

    Hi Thant Zin Htun,
    Check MHA or TMA if you’re using them. If yes, remove them and see if alarm disapears. If MHA is Ok, replace RRU. Is that happening in one or all sectors? What’s the vendor?

    #49111 Reply

    Need to clear 2a:58 alarm

Viewing 4 posts - 61 through 64 (of 64 total)
Reply To: RX Diversity Alarm
Your information:

<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">