- This topic has 63 replies, 1 voice, and was last updated 3 years ago by hh.
7th December 2012 at 17:25 #49093tonyGuest
to solve Rx path diversity alarms of rx path imbalance in 1800 after reading d IDB n CHECK d system monitor 2 read d alarm next 2 do is check d connection from each sector of d DRU i.e A,B,C,D to D hybrid combiner @times though d radio on OMT will tell u is A/C N B/D but d correct connection is of d sectors 2 d combiner is A/B n C/D so which means u ‘r going 2 swapp cable n change one of d jumper dat u notice is not functioning well b4 u do a reset on d cabinet.22nd July 2013 at 18:50 #49094ahmetGuest
hi,I’m ahmet,I’m working GSM a sector.RX PATH A IMBALANCE and RX PATH LOST ON A RECEIVER SIDE alarmları var.Nasıl düzeltebilirim.3rd September 2013 at 19:42 #49095dickson richyGuest
how can configure 6102 or 6202 rus 900 band and 1800 in one shelved8th September 2013 at 09:20 #49096jamilGuest
hello dickson richy
RBS ericsson 6000 etc
the RUS you can sharing it data one data 2 only for same band only
data 1 for 900mhz GSM data 2 for U900 mhz for 3G but the DUG you can do it12th September 2013 at 23:48 #49097liryc1208Guest
Anothet common RX path imbalance is due to TMA issue.6th February 2015 at 15:40 #49098EvilamGuest
The RX PATH Imbalance; Can rais when there’s a cross connection, VSWR2nd April 2015 at 20:44 #49099DUW 41Guest
Can any one help me.
I have issues with the cretion of gigaenternher on port TNA with the same script that i use with DUW 30 i can not see wath is the problema in the DUW 30 it works fine3rd April 2015 at 15:55 #49100JamilGuest
The Ethernet cable between the TNA port not open 1GI change the cable you used bad cable when you integrated8th April 2015 at 19:50 #49101Rui— DUW 41-parte1Guest
hi jamil, already change the cable and is the same cable that we use for DUW 30.
Same problem,always this message
crate attribute: portno 2, autonegotitation, true mastermode, true, configguredspeedduplex, 6 protectivemode,false8th April 2015 at 19:58 #49102Rui— DUW 41-parte2Guest
We already do the oem configured access and do it manually and it is the same result.
i have not have any more idea’s10th December 2015 at 23:42 #49103kiGuest
Can I share RX between RUS and RUG?26th April 2016 at 20:01 #49104NAWRASGuest
WHO I CAN GREAT IDB FOR RBS 6201 ,WE HAVE 2 DUG 2001 AND 4 RUS 01 FOR 3 SECTOR
MY OMT 52
TANX FOR EVRY ONE28th April 2016 at 14:25 #49105KIGuest
Can I use one RUS 01 01 to different sector?
Can you share IDB.28th April 2016 at 14:30 #49106KIGuest
What is the configuration? For example, for 448, assign the first two sector on DUG1 and the remaining sector on DUG 217th December 2016 at 17:18 #49107aliGuest
how to clear rx path imbalance and rx diversity alarm in RBS 6000 MIX MOUDE 2G 900 AND W900 3G