2nd October 2010 at 12:09
#64507
pix
Guest
well, in ALU for example, you can define the “high load” threshold below 50%. As long as
“high” > “low”
you can choose the values you want.
otherwise, you can use some “capture handover” causes, activated only when load A is below 40% and load B is below 95%. Typically called “preferred band HO” or “general capture HO”, and setting:
EN_GENERAL_CPT_HO(A) = enable
Capture_traffic_condition(A) = HIGH
high_load_traffic(A) = 40%
high_load_traffic(B) = 95%
There you are, the ALU solutions… but not useful for Siemens, I’m afraid 🙁
Regards
pix