Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

Reply To: Equipment Failure for HO_REQUEST

#62447
Bijoy
Guest

Hi Ram
If the CIC allocated in the Handover Request message received by the target BSC is marked as
BLOCK or UA, the target BSC will respond to the MSC with a Handover Failure message with the
cause value “Equipment Failure”.

Please check the CIC’s of Ater & A-interface of the Target MSC/BSC,either there is a mismatch or some CIC’s are blocked from one end.

Br\\
Bijoy