28th January 2007 at 15:49
#31309
MikeM to Romano
Guest
Romano,
The inbound DNIS translation feature is used to change the number as it comes in from either a LCRG or TCRG, this feature does not do the actual routing. Again, for routing to specific IP addresses you must configure the DN pattern in each static route that you want to send calls to.
A quick example is if you have a dnis of 1212xxxxxxx and another of 44xxxxxxxxxx that you want to go to 2 different IP’s you create 2 sr’s with the correct IP address and in the first you set the dn pattern to 1212* and in the second you set the dn pattern to 44*.
If you need further assistance on this, please contact me directly.
MikeM
mike_voip@hotmail.com