Thanks Noname and Mat,
I have all documents form Quintum and I did as was instructed, but Clarent GK does not see my registration in his GK
here is Clarent LOG:
Apr/14/2004 16:35:16 6526 H323RAS:H323Gatekeeper::302 WARNING: OnGRQNotification() : got empty H323-ID: \RASToClarentProxy.cpp line 3961
Apr/14/2004 16:35:16 6526 H323RAS:H323Maps::302 WARNING: CH323EndpointMap::GetH323EndpointData : epIdentifier x.x.x.x – 24578 not found in Map: \RASToClarentProxy.cpp line 941
However, we will continue with testing, but good things is that this is possible.
Another problem I can see is HOW TO KEEP MY TENOR TO WORK WITH CISCO AND CLARENT AT SAME TIME.
For Cisco I am using GW to GW connetion and made Static route to Cisco for orifination (from my side).
For Clarent, I MUST made GW to GK connection, so My setup on Tenor is very different (config h323gw#, config gksys#), so I am not sure that this setup will allow connection to Cisco GW.
As far as I can see, to work with Clarent and Cisco, I must go via Clarent GK to work with Cisco, because all my calls are registred in Clarent GK.
Am I right????