Generic selectors
Exact matches only
Search in title
Search in content

Reply To: Help needed Quintum A400

#26297
Essam
Guest

Here is a copy of the config

Unit
—-
Unit: 1
IP Address = 192.168.1.101
External IP Address = 0.0.0.0
Name = voip

Online = 1
Relay ResetTime = 240
Relay Reset Number = 2

TcpKeepAlive = Enabled(1)

System
——
Country Value = 4
Country Code =
Area Code =
Minimum DN = 3
Maximum DN = 20
International Prefix:
Long Distance Prefix = 0
Carrier Selection Prefix:
Intercom Used = no(0)
Private DN Used = no(0)
Interdigit Timeout = 4 sec.

Contact =
Location =
IP Address : of Snmp Trap Server 1 = 0.0.0.0
IP Address : of Snmp Trap Server 2 = 0.0.0.0
IP Address : of Snmp Trap Server 3 = 0.0.0.0

IP Address : Port # of Syslog Server 1 = 0.0.0.0 : 514
IP Address : Port # of Syslog Server 2 = 0.0.0.0 : 514
IP Address : Port # of Syslog Server 3 = 0.0.0.0 : 514
Syslog Facility = 16

IP Address : Port # of Cdr Server 1 = 0.0.0.0 : 0
IP Address : Port # of Cdr Server 2 = 0.0.0.0 : 0
Cdr Password:
Cdr Format: 0

Ring Frequency = 20 Hz(0)
PSTN Ring Sensitivity = Normal(0)

Primary Time Server: IP Address = 0.0.0.0
Secondary Time Server: IP Address = 0.0.0.0
UTC Offset: Unknown

Disc Tone Frequency: 480 Hz (min) : 620 Hz (max)
Disconnect On/Off Time: 250 mSec(on) : 250 mSec(off)

Call Indication Tone = None(0)
Disable GUI = no(0)

Dialplan
——–
User Programmable DP = No
Dialplan table:
index:Pattern DpType min max nprefix

System LAN
———-
Subnet Mask = 255.255.255.0
Default Gateway = 192.168.1.1

PSTN Trunk Group
—————-
PSTN Trunk Group: 1
Name = PstnPassThrough1
Pass Through = no(0)
PT Trunk ID = 0
Provide Call Progress Tone = no(0)
Busyout = no(0)
Hunt Algorithm = ascending(0)
Modem Calls = No(0)
Direction = both(2)
DN Used = public
End Of Dial = yes(1)
End Of Dial Digit = #
Add End of Dial Digit = no(0)
Ivr Type = None
CID = From Interface(0)
External Routing Request = no(0)
Auto Switch Enable = no(0)
Forced IP Routing # = none
Trunk ID(Account Code) = none
Trunk ID Delivery = none
2 Stage Dial = No
Translate Inbound Caller ID = no(0)
Relay Caller ID = yes(1)
IP Extension = yes(1)
channel ip-addr dnis rmt-line chan
channel *: 216.52.153.206 723#
Maximum LAM Calls Allowed = 4
LAM: Index Pattern Replacement NumberType
Cas Signaling Type = loop start(1)
Cas Orientation = user(0)
Dial Tone Detect = yes(1)
Dial Delay Timeout = 1000
Answer Delay Timeout = 0
Flash-Hook Signaling = no(0)
Supervision = none(0)
Caller Id Detection = no(0)
dtmf-ontime = 100
dtmf-offtime = 100
Channel:
unit# 1 line# 2: 1,2,3,4

PBX Trunk Group
—————
PBX Trunk Group: 1
Name = PbxPassThrough1
Pass Through = yes(1)
PT Trunk ID = 0
Provide Call Progress Tone = no(0)
Multipath = no(0)
Hunt Algorithm = ascending(0)
Modem Calls = No(0)
Direction = both(2)
DN Used = public
End Of Dial = yes(1)
End Of Dial Digit = #
Add End of Dial Digit = no(0)
Ivr Type = None
Partial TG = no(0)
CID = Trunk ID(1)
External Routing Request = no(0)
Auto Switch Enable = no(0)
Forced IP Routing # = none
Trunk ID(Account Code) = none
Trunk ID Delivery = none
2 Stage Dial = No
Translate Inbound Caller ID = no(0)
Relay Caller ID = yes(1)
IP Extension = yes(1)
channel ip-addr dnis rmt-line chan
channel *: 216.52.153.206 723#
Public Number of Digits = 7
Private Number of Digits = 7
Public Hunt Ldn’s:
1: 329602336085
Private Hunt Ldn’s:
BDN: Index Bdn
Cas Signaling Type = loop start(1)
Cas Orientation = net(2)
Flash-Hook Signaling = yes(1)
Flash-Hook Min = 200
Flash-Hook Max = 700
Supervision = none(0)
Caller Id Generation = no(0)
dtmf-ontime = 100
dtmf-offtime = 100
Channel:
unit# 1 line# 1: 1,2,3,4

IP Trunk Group
—————
Incoming IP call delete digits = 0
Incoming IP call prefix =
Outgoing IP call delete digits = 0
Outgoing IP call prefix =
Prefix Trunk ID = no(0)
Default Trunk = No
External Routing Request = no(0)
Display Information ID = Tenor-Gateway

Line
—-
Line: 1
Law = uLaw(0)
Rx Gain = -4dB
Tx Gain = -2dB
Line: 2
Law = uLaw(0)
Rx Gain = 0dB
Tx Gain = 0dB
Guard Time = 0mS
DAA Start Up = Enabled

Bandwidth Management
——————–
Time of Day Maximum Bandwidth:
Day = 0(Sunday)
Hour = 00 * * * * * *
Hour = 06 * * * * * *
Hour = 12 * * * * * *
Hour = 18 * * * * * *
Day = 1(Monday)
Hour = 00 * * * * * *
Hour = 06 * * * * * *
Hour = 12 * * * * * *
Hour = 18 * * * * * *
Day = 2(Tuesday)
Hour = 00 * * * * * *
Hour = 06 * * * * * *
Hour = 12 * * * * * *
Hour = 18 * * * * * *
Day = 3(Wednesday)
Hour = 00 * * * * * *
Hour = 06 * * * * * *
Hour = 12 * * * * * *
Hour = 18 * * * * * *
Day = 4(Thursday)
Hour = 00 * * * * * *
Hour = 06 * * * * * *
Hour = 12 * * * * * *
Hour = 18 * * * * * *
Day = 5(Friday)
Hour = 00 * * * * * *
Hour = 06 * * * * * *
Hour = 12 * * * * * *
Hour = 18 * * * * * *
Day = 6(Saturday)
Hour = 00 * * * * * *
Hour = 06 * * * * * *
Hour = 12 * * * * * *
Hour = 18 * * * * * *

Gatekeeper Administration
————————-

Endpoint Authorization Type = 0 (None)

Allowed Endpoints
IP Mask
No Allowed Endpoints Configured

Barred Endpoints
IP Mask
No Barred Endpoints Configured

Gatekeeper System
—————–
Zone Name = saudi
Border Element IP Address(prim) = 0.0.0.0
Border Element IP Address(sec) = 0.0.0.0
Discovery IP Address = 0.0.0.0
Gatekeeper Password =
LRQ returns all candidates(0)
Maximum LRQ Hops = 0
WAN Call Limit = 0 (disabled)
LCF/LRJ V3plus = 1
Gatekeeper Option Flags:
Use IP Header Address = no(0)
Ridgeway ARQ = no(0)

Border Element
—————–
Static Routing
No Static Routes configured

DSP

Voice Coding algorithm = 81
Voice Information Field size = 192 bits
Silence Suppression = Enable(1)
Minimum Jitter buffer = 60 msec
Maximum Jitter buffer = 300 msec
Receive Gain (PCM -> IP) = -2 dB
Transmit Gain (IP -> PCM) = -4 dB
Digit Relay = 0
Fax Relay Type = 0
Fax Maximum Rate = 144
Fax Playout FIFO nominal delay = 600
Fax Modem Coding = 0
Idle Time = 0
Answer Supervision Options = 0

AutoSwitch
———-
Auto Threshold = 50

H323 Gateway
—————–
Primary GK Address = 0.0.0.0
Primary Auto Discovery = 1
Secondary GK Address = 0.0.0.0
Secondary Auto Discovery = 0
H.323 ID = remal
Register DN = Register as E.164 IDs(2)
Ignore Bandwidth in ACF = no(0)
Default H245 Tunneling = yes(1)
Round Trip Delay = 0
One Stage Dialing = 0
RRQ Interval = 0
H323 Interop Flags:
H225 GW Protocol = h323(0)
Do BRQ = 0
SlaveSessionId0 = 0
AllowFastStartOnly = No(0)
RRQv3plus= No(0)
ProgressInd Alert= No(0)
StartH245Flag= No(0)
Automatic Ext IP Update= No(0)
RTP Verification= No(0)

Do Lightweight RRQ = no(0)

Radius User
———–

host p 0.0.0.0
authenticationport p 1812
accountingport p 1813

host s 0.0.0.0
authenticationport s 1812
accountingport s 1813

retry = 3
timeout = 5
accountingtype = 0
billingvendor 0
sharedsecret

IVR
——

Primary File Server: IP Address = 0.0.0.0
Secondary File Server: IP Address = 0.0.0.0
timeout: 5

Enabled Languages: None

CID Translation Table
——
Caller ID Translation Table
Index Pattern Replacement

Radius Endpoint
—————

host p 0.0.0.0
authenticationport p 1812
accountingport p 1813

host s 0.0.0.0
authenticationport s 1812
accountingport s 1813

retry = 3
timeout = 5
idtype = 0
passwordtype = 0
sharedsecret

Product Name: Tenor Analog A400 Multipath Switch – 4 ports (Rev. B)
Gatekeeper Status: Mini
GK Calls Allowed: 4
Feature Bit Status: -PS/+RB/+ER
Languages allowed: 1
Serial Number: A002-008771
Ethernet Address: 00-30-E1-00-87-71
IP Address: 192.168.1.101
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
System Software Version: P4-2-20-26(LEC) (1719133/0x66A4)
Boot Software Version: P4-1-3 (180592/0xE814)
Database Version: 2.08 09-13-2000 (277900)