Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

Reply To: Quintum 800

#22984
Serguey
Guest

Im configured everything on the Quintun Tenor A200, and after rebooting it couldn’t start up.
How can i rest it to factory default?
There is start up message:

Internet Telephony Gateway ( Include FirstAid code)
Hardware Version : 1.02
Boot Code Version : 1.03
LAN Port MAC Address : 00.30.e1.50.0b.6e
WAN Port MAC Address : 00.30.e1.50.0b.6f

RTL8019 NIC command Register write test — OK
RTL8019 MAC Loopback Test — OK
NW1034 register Read/Write test — OK
AudioCode_0 HPI register test — OK
AudioCode_0 Memory Test — OK
AudioCode_1 HPI register test — OK
AudioCode_1 Memory Test — OK

AudioCodes Kernel code software version
Name: Ac48302ck-S Ver : 1.26 Date:1/24/2001

AudioCodes Program code software version
Name: Ac48302ce3-S Ver : 1.41 Date:5/14/2002
Press ENTER to get in POST console within 3 seconds.
…………………………………………………………
Normal code checksum ok

Starting system

Кre
AudioCodes
** Trap : Data Abort Handler
Data Abort Instruction Address: 0x10f9ff4
Data Abort Task: H323App
reash Write OK!!!
AudioCodes
** Trap : Data Abort Handler
Data Abort Instruction Address: 0x10f9ff4
Data Abort Task: H323App
reash Write OK!!!
AudioCodes
** Trap : Data Abort Handler
Data Abort Instruction Address: 0x10f9ff4
Data Abort Task: H323App
reash Write OK!!!
AudioCodes
** Trap : Data Abort Handler
Data Abort Instruction Address: 0x10f9ff4
Data Abort Task: H323App
reash Write OK!!!
AudioCodes
** Trap : Data Abort Handler
Data Abort Instruction Address: 0x10f9ff4
Data Abort Task: H323App