Generic selectors
Exact matches only
Search in title
Search in content

Quintum and CallShop

  • This topic is empty.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #30062 Reply
    frooog
    Guest

    I am trying to configure my quintum to communicate with a software callshop. I have 4 phones booth connected to the PBX ports of my quintum. I would like to do accounting and billing, when someone make a call the callshop indicate the time and amount of money to pay.
    The quintum (192.168.100.5) is behing a nated router and the callshop machine IP is 192.168.100.44
    I already configured the callshop, and I would like that you check the configuration of my quintum so that it communicates with the machine on which the callshop is installed.

    Channel:
    unit# 1 line# 2: 1,2,3,4

    PBX Trunk Group
    —————
    PBX Trunk Group: 1
    Name = tel1
    Pass Through = no(0)
    PT Trunk ID = 0
    Provide Call Progress Tone = yes(1)
    Multipath = yes(1)
    Hunt Algorithm = ascending(0)
    Modem Calls = No(0)
    Direction = both(2)
    DN Used = public
    End Of Dial = yes(1)
    End Of Dial Digit = #
    Add End of Dial Digit = no(0)
    Ivr Type = None
    Partial TG = no(0)
    CID = First LDN(2)
    External Routing Request = no(0)
    Auto Switch Enable = no(0)
    Forced IP Routing # = none
    Trunk ID(Account Code) = 9901
    Trunk ID Delivery = none
    2 Stage Dial = No
    Translate Inbound Caller ID = yes(1)
    Relay Caller ID = no(0)
    IP Extension = no(0)
    Public Number of Digits = 10
    Private Number of Digits = 4
    Public Hunt Ldn’s:
    1: 819134001
    Private Hunt Ldn’s:
    BDN: Index Bdn
    Cas Signaling Type = loop start(1)
    Cas Orientation = net(2)
    Flash-Hook Signaling = yes(1)
    Flash-Hook Min = 200
    Flash-Hook Max = 700
    Supervision = none(0)
    Caller Id Generation = no(0)
    dtmf-ontime = 100
    dtmf-offtime = 100
    Channel:
    unit# 1 line# 1: 1
    PBX Trunk Group: 2
    Name = tel2
    Pass Through = no(0)
    PT Trunk ID = 1
    Provide Call Progress Tone = yes(1)
    Multipath = yes(1)
    Hunt Algorithm = ascending(0)
    Modem Calls = No(0)
    Direction = both(2)
    DN Used = public
    End Of Dial = yes(1)
    End Of Dial Digit = #
    Add End of Dial Digit = no(0)
    Ivr Type = None
    Partial TG = no(0)
    CID = First LDN(2)
    External Routing Request = no(0)
    Auto Switch Enable = no(0)
    Forced IP Routing # = none
    Trunk ID(Account Code) = 9902
    Trunk ID Delivery = none
    2 Stage Dial = No
    Translate Inbound Caller ID = yes(1)
    Relay Caller ID = no(0)
    IP Extension = no(0)
    Public Number of Digits = 10
    Private Number of Digits = 4
    Public Hunt Ldn’s:
    1: 819134002
    Private Hunt Ldn’s:
    BDN: Index Bdn
    Cas Signaling Type = loop start(1)
    Cas Orientation = net(2)
    Flash-Hook Signaling = yes(1)
    Flash-Hook Min = 200
    Flash-Hook Max = 700
    Supervision = none(0)
    Caller Id Generation = no(0)
    dtmf-ontime = 100
    dtmf-offtime = 100
    Channel:
    unit# 1 line# 1: 2
    PBX Trunk Group: 3
    Name = tel3
    Pass Through = no(0)
    PT Trunk ID = 2
    Provide Call Progress Tone = yes(1)
    Multipath = yes(1)
    Hunt Algorithm = ascending(0)
    Modem Calls = No(0)
    Direction = both(2)
    DN Used = public
    End Of Dial = yes(1)
    End Of Dial Digit = #
    Add End of Dial Digit = no(0)
    Ivr Type = None
    Partial TG = no(0)
    CID = First LDN(2)
    External Routing Request = no(0)
    Auto Switch Enable = no(0)
    Forced IP Routing # = none
    Trunk ID(Account Code) = 9903
    Trunk ID Delivery = none
    2 Stage Dial = No
    Translate Inbound Caller ID = yes(1)
    Relay Caller ID = no(0)
    IP Extension = no(0)
    Public Number of Digits = 10
    Private Number of Digits = 4
    Public Hunt Ldn’s:
    1: 819134003
    Private Hunt Ldn’s:
    BDN: Index Bdn
    Cas Signaling Type = loop start(1)
    Cas Orientation = net(2)
    Flash-Hook Signaling = yes(1)
    Flash-Hook Min = 200
    Flash-Hook Max = 700
    Supervision = none(0)
    Caller Id Generation = no(0)
    dtmf-ontime = 100
    dtmf-offtime = 100
    Channel:
    unit# 1 line# 1: 3
    PBX Trunk Group: 4
    Name = tel4
    Pass Through = no(0)
    PT Trunk ID = 3
    Provide Call Progress Tone = yes(1)
    Multipath = yes(1)
    Hunt Algorithm = ascending(0)
    Modem Calls = No(0)
    Direction = both(2)
    DN Used = public
    End Of Dial = yes(1)
    End Of Dial Digit = #
    Add End of Dial Digit = no(0)
    Ivr Type = None
    Partial TG = no(0)
    CID = First LDN(2)
    External Routing Request = no(0)
    Auto Switch Enable = no(0)
    Forced IP Routing # = none
    Trunk ID(Account Code) = 9904
    Trunk ID Delivery = none
    2 Stage Dial = No
    Translate Inbound Caller ID = yes(1)
    Relay Caller ID = no(0)
    IP Extension = no(0)
    Public Number of Digits = 10
    Private Number of Digits = 4
    Public Hunt Ldn’s:
    1: 819134004
    Private Hunt Ldn’s:
    BDN: Index Bdn
    Cas Signaling Type = loop start(1)
    Cas Orientation = net(2)
    Flash-Hook Signaling = yes(1)
    Flash-Hook Min = 200
    Flash-Hook Max = 700
    Supervision = none(0)
    Caller Id Generation = no(0)
    dtmf-ontime = 100
    dtmf-offtime = 100
    Channel:
    unit# 1 line# 1: 4

    Radius User
    ———–

    host p 192.168.100.44
    authenticationport p 1812
    accountingport p 1813

    host s 0.0.0.0
    authenticationport s 1812
    accountingport s 1813

    retry = 3
    timeout = 5
    accountingtype = 2
    billingvendor 0
    sharedsecret *****

    IVR
    ——

    Primary File Server: IP Address = 0.0.0.0
    Secondary File Server: IP Address = 0.0.0.0
    timeout: 5

    Enabled Languages: None

    CID Translation Table
    ——
    Caller ID Translation Table
    Index Pattern Replacement

    Radius Endpoint
    —————

    host p 192.168.100.5
    authenticationport p 1812
    accountingport p 1813

    host s 0.0.0.0
    authenticationport s 1812
    accountingport s 1813

    retry = 3
    timeout = 5
    idtype = 0
    passwordtype = 0
    sharedsecret

    #30063 Reply
    MikeM
    Guest

    Froog,

    What are you using for the accounting and billing part of this? Do you have a radius server to do this as the Quintum will not do this for you. It can provide basic CDR records, but not any full accounting and billing.

    #30064 Reply
    Tony
    Guest

    check mutualphone.com, they have a callshop billing software, it does exactly what you want

    #30065 Reply
    frooog
    Guest

    I am using ipercall callshop from ipercom

Viewing 4 posts - 1 through 4 (of 4 total)
Reply To: Quintum and CallShop
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">