Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

Cisco ATA 186 behind Linksys NAT

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #28221 Reply
    Karin
    Guest

    I have successfully setup a gatekeeper for my Ata’s Network. I can call to/from any ata to other without problem.

    But, I need to have some ATA’S
    behind Linksys, and when this happens… the ATA can’t find the address of the gatekeeper for register.. so i Have no dial-tone, no nothing… I tried setting-up the NAT IP of the linksys , but that didn’t work, also i open some ports (the media ports and others) but it’s still not working.

    Any one have some information about this ?

    Thanks in advance.

    #28222 Reply
    Gary
    Guest

    What you need to do is use a STUN server. I think the field in the ATA you need to fill in is called NAT server IP

    Use this one: stun.xten.com

    hope this helps.

    #28223 Reply
    Luis
    Guest

    Make sure your linksys have the dhcp deactivated and route the port 1720 to the ATA that you are using. Maybe, the ata is not having a response from the gatekeeper. Also check on the gatekeeper if the ata is registered on it. Good luck. Luis.

Viewing 3 posts - 1 through 3 (of 3 total)
Reply To: Cisco ATA 186 behind Linksys NAT
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">