Quintum D-3000 setup for orig/ter

I will be very happy if somebody can help me to solve next problem:

I have one unit of D-3000 which I use at the moment for termination. everything works fine in this segment.

Now I want to use same unit of origination too, but to continue with termination with same unit.

I configured D-3000 to answer the call with PIN authorization directly on the unit. Gateway answers the call, ask for PIN, PIN is entered, then dial tone is provided. After dialing number call is getting disconnected with fast busy signal.

IP of gateway where traffic have to be sent is 195.35.19.234 Gateway is working fine, when I place call with ATA box everything works fine. Tech prefix which have to be used for placing calls is 9992.

Here is copy of my config file:

Unit
—-
Unit: 1
IP Address = 195.29.91.203
External IP Address = 0.0.0.0
Name = VOIP
Clock Source = PSTN(0)

Online = 1
Relay ResetTime = 240
Relay Reset Number = 2

TcpKeepAlive = Disabled(0)

System
——
Country Value = 1
Country Code =
Area Code =
Minimum DN = 7
Maximum DN = 20
International Prefix:
Long Distance Prefix =
Carrier Selection Prefix:
Intercom Used = no(0)
Private DN Used = no(0)
Interdigit Timeout = 8 sec.

Contact =
Location =
IP Address : of Snmp Trap Server 1 = 0.0.0.0
IP Address : of Snmp Trap Server 2 = 0.0.0.0
IP Address : of Snmp Trap Server 3 = 0.0.0.0

IP Address : Port # of Syslog Server 1 = 0.0.0.0 : 514
IP Address : Port # of Syslog Server 2 = 0.0.0.0 : 514
IP Address : Port # of Syslog Server 3 = 0.0.0.0 : 514
Syslog Facility = 16

IP Address : Port # of Cdr Server 1 = 195.29.91.200 : 9002
IP Address : Port # of Cdr Server 2 = 0.0.0.0 : 0
Cdr Password: 362302
Cdr Format: 0

Primary Time Server: IP Address = 0.0.0.0
Secondary Time Server: IP Address = 0.0.0.0
UTC Offset: Unknown

Disc Tone Frequency: 480 Hz (min) : 620 Hz (max)
Disconnect On/Off Time: 250 mSec(on) : 250 mSec(off)

Call Indication Tone = None(0)

Dialplan
——–
User Programmable DP = No
Dialplan table:
index:Pattern DpType min max nprefix

System LAN
———-
Subnet Mask = 255.255.255.224
Default Gateway = 195.29.91.193

PSTN Trunk Group
—————-
PSTN Trunk Group: 1
Name = PstnPassThrough1
Pass Through = no(0)
PT Trunk ID = 0
Provide Call Progress Tone = no(0)
Busyout = no(0)
Hunt Algorithm = descending(1)
Overlap Dial = no(0)
Modem Calls = No(0)
Direction = both(2)
DN Used = public
End Of Dial = no(0)
Ivr Type = 2nd Dial Tone
Pin Code = 1234
CID = From Interface(0)
External Routing Request = no(0)
Auto Switch Enable = no(0)
Forced IP Routing # = none
Trunk ID(Account Code) = none
Trunk ID Delivery = none
2 Stage Dial = No
Translate Inbound Caller ID = no(0)
Relay Caller ID = no(0)
IP Extension = no(0)
Maximum LAM Calls Allowed = 30
LAM: Index Pattern Replacement NumberType TON NPI
1 < 38551> < > 0 0 0
2 < 385> < 0> 0 0 0
3 < 3856> < 9999> 0 0 0
4 < 3857> < 9999> 0 0 0
5 < 3858> < 9999> 0 0 0
6 < 38598> < 9999> 0 0 0
7 < 3850> < 9999> 0 0 0
8 < 38510> < 9999> 0 0 0
9 < 385510> < 99999> 0 0 0
10 < 38599> < 9999> 0 0 0
CCS Or CAS = ccs(0)
Channel:
unit# 1 line# 2: 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31

PBX Trunk Group
—————
PBX Trunk Group: 1
Name = PbxPassThrough1
Pass Through = yes(1)
PT Trunk ID = 0
Provide Call Progress Tone = no(0)
Multipath = yes(1)
Hunt Algorithm = ascending(0)
Overlap Dial = no(0)
Modem Calls = No(0)
Direction = both(2)
DN Used = public
End Of Dial = yes(1)
End Of Dial Digit = #
Add End of Dial Digit = no(0)
Ivr Type = None
Partial TG = no(0)
CID = From Interface(0)
External Routing Request = no(0)
Auto Switch Enable = no(0)
Forced IP Routing # = none
Trunk ID(Account Code) = none
Trunk ID Delivery = none
2 Stage Dial = No
Translate Inbound Caller ID = no(0)
Relay Caller ID = no(0)
IP Extension = no(0)
Public Number of Digits = 7
Private Number of Digits = 4
Public TON = 1
Public NPI = 0
Private TON = 0
Private NPI = 9
Public Hunt Ldn’s:
Private Hunt Ldn’s:
BDN: Index Bdn
CCS Or CAS = ccs(0)
Channel:
unit# 1 line# 1: 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31

IP Trunk Group
—————
Incoming IP call delete digits = 0
Incoming IP call prefix =
Outgoing IP call delete digits = 2
Outgoing IP call prefix = 9992
Prefix Trunk ID = no(0)
Default Trunk = No
External Routing Request = no(0)
Display Information ID = Tenor-Gateway

Line
—-
Line: 1
Law = ALaw(1)
T1 or E1 = E1(1)
Line Code = HDB3(2)
CRC = yes(1)
E1 Framing Format = SF(0)
E1 Impedance = 120ohm(1)
Line: 2
Law = ALaw(1)
T1 or E1 = E1(1)
Line Code = HDB3(2)
CRC = yes(1)
E1 Framing Format = SF(0)
E1 Impedance = 120ohm(1)

Signaling
———
Signaling Group: 1
Name = CCS00
ISDN Protocol Type = ETSI(5)
Orientation = net/master(1)
DCh Num = 16
Ignore TON/NPI = yes
FAS unit = 1
FAS line = 1
link establishment = always(1)
Relay PROG = yes(1)
Force Outbound BCAP = No(0)
Forced ProgInd IE Outbound = Disabled
Signaling Group: 2
Name = CCS00
ISDN Protocol Type = ETSI(5)
Orientation = user/slave(0)
DCh Num = 16
Ignore TON/NPI = yes
FAS unit = 1
FAS line = 2
link establishment = always(1)
Relay PROG = yes(1)
Force Outbound BCAP = No(0)
Forced ProgInd IE Outbound = Disabled

Bandwidth Management
——————–
Time of Day Maximum Bandwidth:
Day = 0(Sunday)
Hour = 00 * * * * * *
Hour = 06 * * * * * *
Hour = 12 * * * * * *
Hour = 18 * * * * * *
Day = 1(Monday)
Hour = 00 * * * * * *
Hour = 06 * * * * * *
Hour = 12 * * * * * *
Hour = 18 * * * * * *
Day = 2(Tuesday)
Hour = 00 * * * * * *
Hour = 06 * * * * * *
Hour = 12 * * * * * *
Hour = 18 * * * * * *
Day = 3(Wednesday)
Hour = 00 * * * * * *
Hour = 06 * * * * * *
Hour = 12 * * * * * *
Hour = 18 * * * * * *
Day = 4(Thursday)
Hour = 00 * * * * * *
Hour = 06 * * * * * *
Hour = 12 * * * * * *
Hour = 18 * * * * * *
Day = 5(Friday)
Hour = 00 * * * * * *
Hour = 06 * * * * * *
Hour = 12 * * * * * *
Hour = 18 * * * * * *
Day = 6(Saturday)
Hour = 00 * * * * * *
Hour = 06 * * * * * *
Hour = 12 * * * * * *
Hour = 18 * * * * * *

Gatekeeper Administration
————————-

Endpoint Authorization Type = 0 (None)

Allowed Endpoints
IP Mask
1 195.29.91.205 255.255.255.255
2 195.29.91.203 255.255.255.255
3 195.35.19.227 255.255.255.255
4 212.162.3.2 255.255.255.255
5 195.35.19.234 255.255.255.255

Barred Endpoints
IP Mask
No Barred Endpoints Configured

Gatekeeper System
—————–
Zone Name = HR
Border Element IP Address(prim) = 195.29.91.203
Border Element IP Address(sec) = 0.0.0.0
Discovery IP Address = 0.0.0.0
Gatekeeper Password =
LRQ returns all candidates(0)
Maximum LRQ Hops = 0
WAN Call Limit = 0 (disabled)
LCF/LRJ V3plus = 1
Gatekeeper Option Flags:
Use IP Header Address = no(0)
Ridgeway ARQ = no(0)

Border Element
—————–
Static Routing
Static Route #1
RouteName = primus
Gkmode = Destination is a Gateway (0)
CallSignalAddress = 195.35.19.234:1720
1:00* Public LDN priority(2)

DSP
—
Voice Coding algorithm = 68
Voice Information Field size = 320 bits
Silence Suppression = Enable(1)
Minimum Jitter buffer = 80 msec
Maximum Jitter buffer = 480 msec
Receive Gain (PCM -> IP) = -2 dB
Transmit Gain (IP -> PCM) = -4 dB
Digit Relay = 0
Fax Relay Type = 1
T.38 Fax Low Speed Data Redundancy = 2
T.38 Fax High Speed Data Redundancy = 1
Fax Maximum Rate = 144
Fax Playout FIFO nominal delay = 600
Fax Modem Coding = 0
Idle Time = 40
Answer Supervision Options = 0

AutoSwitch
———-
Auto Threshold = 50

H323 Gateway
—————–
Primary GK Address = 0.0.0.0
Primary Auto Discovery = 0
Secondary GK Address = 0.0.0.0
Secondary Auto Discovery = 0
H.323 ID =
Register DN = Register as GW Prefixes(1)
Ignore Bandwidth in ACF = no(0)
Default H245 Tunneling = yes(1)
Round Trip Delay = 0
One Stage Dialing = 0
RRQ Interval = 0
H323 Interop Flags:
H225 GW Protocol = h323(0)
Do BRQ = 0
SlaveSessionId0 = 0
AllowFastStartOnly = No(0)
RRQv3plus= No(0)
ProgressInd Alert= No(0)
StartH245Flag= No(0)
Automatic Ext IP Update= No(0)
RTP Verification= No(0)

Do Lightweight RRQ = no(0)

Radius User
———–

host p 195.29.91.200
authenticationport p 1812
accountingport p 1813

host s 195.29.91.199
authenticationport s 1812
accountingport s 1813

retry = 5
timeout = 10
accountingtype = 2
billingvendor 0
sharedsecret ******

IVR
——

Primary File Server: IP Address = 0.0.0.0
Secondary File Server: IP Address = 0.0.0.0
timeout: 5

Enabled Languages: None

CID Translation Table
——
Caller ID Translation Table
Index Pattern Replacement

Radius Endpoint
—————

host p 0.0.0.0
authenticationport p 1812
accountingport p 1813

host s 0.0.0.0
authenticationport s 1812
accountingport s 1813

retry = 3
timeout = 5
idtype = 0
passwordtype = 0
sharedsecret

Product Name: Tenor Digital Multipath Switch – 30 ports (Rev. B)
Gatekeeper Status: Mini
GK Calls Allowed: 30
Feature Bit Status: -PS/+RB/-ER
Languages allowed: 1
Serial Number: A001-000FB1
Ethernet Address: 00-30-E1-00-0F-B1
IP Address: 195.29.81.203
Subnet Mask: 255.255.255.224
Default Gateway: 195.29.81.193
System Software Version: P4-2-20-29 (1664242/0x8E96)
Boot Software Version: P4-1-15 (186964/0xC8BE)
Database Version: 2.08 09-13-2000 (277900)