Generic selectors
Exact matches only
Search in title
Search in content

TENOR backup

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
  • #26179 Reply

    Dear all,

    pls brief how to take backup and restore the same on TENOR A800.



    #26180 Reply

    Hi Linman,

    Fortunately this is a very simple task and can be carried out with any PC running standard Windows.

    Run a Command Window (A DOS window to those that remember DOS) and type:


    where is the ip number of the unit you wish to back up.

    Log into the unit, on the Tenors there is no user name, just a password.

    At the ftp prompt type

    ftp> bin

    To go into binary mode

    then type

    ftp> get db.bin backupdb.bin

    This will copy this working configuration to a file called backupdb.bin on your hard disk.

    To restore this login to the unit using ftp again and type:

    ftp> put backupdb.bin db.bin

    Simple as that…

    Hope this helps, if you need any further information please feel free to contact me:


    #26181 Reply

    Can i use the same procedure to replicate the config to another TENOR A800.

    If not, is there any similar procedure to do the same.

    Thanks all.

    #26182 Reply

    Yes you can do exactly that instead of typing “get” you type “put”

    #26183 Reply

    If you are doing this remotely, remeber when you upload the new DB.bin as soon as you restart the ip address’s that where stored in that file will be used. You will then have to use the console cable to restore the proper settings.

Viewing 5 posts - 1 through 5 (of 5 total)
Reply To: TENOR backup
Your information:

<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">