- This topic has 4 replies, 1 voice, and was last updated 17 years, 6 months ago by
Reza.
-
AuthorPosts
-
reza
GuestHi all
I want to send a call to a Gateway which is not registered in my gatekeeper(GK-1).
I set my gatekeeper as follows :zone local gk-1 testvoip.com
alias static 192.168.11.70 1720 gkid gk-1 gateway voip ras 192.168.11.70 1719
gw-type-prefix 2121* gw ipaddr 192.168.11.70 1720but the call is rejected
Does anybody have any idea what’s wrong?
Thanks
*******************************************************************
#debug gatekeeper main 105d23h: gk_dns_locate_gk(): No Name servers
5d23h: rassrv_get_addrinfo(212101133452253): Matched tech-prefix 2121
5d23h: rassrv_get_addrinfo(212101133452253): unresolved zone prefix
5d23h: gk_rassrv_sep_arq(): rassrv_get_addrinfo() failed (return code = 0x103)*******************************************************************
#show dial-peer voice 21210 voip
.
.
.
.
Successful Calls = 0, Failed Calls = 17, Incomplete Calls = 0
Accepted Calls = 0, Refused Calls = 0,
Last Disconnect Cause is “15 “,
Last Disconnect Text is “call rejected.”,#sh gatekeeper endpoints
GATEKEEPER ENDPOINT REGISTRATION
================================
CallSignalAddr Port RASSignalAddr Port Zone Name Type F
————— —– ————— —– ——— —- —
192.168.174.20 1720 192.168.174.20 53350 gk-1 VOIP-GW
H323-ID: gw-1
192.168.11.70 1720 192.168.11.70 1719 gk-1 VOIP-GW S
Total number of active registrations = 2Tech Guy
GuestIs there not an option to set your gatekeeper to allow unregistered endpoints?
Reza
GuestHi Tech guy
I read a document in Cisco Site that we cand sent call to an unregistered gateway by this command “”alias static””. but I couldn’t loacte any sample config.
do you have any idea what wrong steps I had ?thanks
Tech Guy
GuestI’m sorry, I’m not familiar with the Cisco Gatekeeper configuration so I am unable to help you there.
Reza
GuestThanks
-
AuthorPosts