Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

ATA 186 port 2 P2P using D-link

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 2nd May 2003 at 04:37 #24312
    Joseph
    Guest

    Please Help!!!

    I only have one way sound on my port 2 ATA 186. Doing peer to Peer in SIP. Port 1 works very well.

    ATA 186 > D-LINK –IP– D-LINK ATA 186

    Thanks in advance

    3rd May 2003 at 19:11 #24313
    Joseph
    Guest

    Just ran debug for both ports ..
    Can someone help me. Still one way sound.

    Port 2 ( One way sound)
    Response=100; Trying
    Response=180; Ringing
    SCC:ev=10[1:0] 3 0
    Response=200; OK
    useUserInd = 1
    Frames per packet=2
    SetG723Mode: 2 0
    [1]Enable encoder 0
    [1]: EC 1
    RTP TX[1]:SSRC_ID = a1a797bb
    RTP Tx Init: 1, 1
    [1]Enable encoder 0
    Enable LEC adapt [1]=1
    [1]Start/Resume Media-> 192.168.0.141:20000 (pt=0)
    SCC:ev=12[1:0] 3 0
    9:30;0,3,0,0,
    SCC Cmd[1:0]DISCONNECT
    Got BYE/CANCEL Resp
    SCC:ev=13[1:0] 10 0
    SCC Cmd[1:0]RELEASE
    >>> SIP Soft Reset [1:0] 192.168.0.141:20000 (pt=0)
    SCC:ev=12[0:0] 3 0
    [0]DPKT 1st: 800 560, pt 0
    2:00;3,0,0,0,
    SCC Cmd[0:0]DISCONNECT
    Got BYE/CANCEL Resp
    SCC:ev=13[0:0] 10 0
    SCC Cmd[0:0]RELEASE
    >>> SIP Soft Reset [0:0]

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.