- This topic has 286 replies, 1 voice, and was last updated 18 years, 2 months ago by MikeM to Shayan.
-
AuthorPosts
-
16th April 2003 at 21:30 #23682EddieGuest
VoIP top Quality, you dont quite know what you are talking about. Sysmaster is company that has in its product range, gateways which compete with those from Quintum. These gateways are “software” upgradeable. Sysmaster gateways do not require Quintums to operate, I am not sure where you got that from, you can completely have all your network elements and run your VOIP operations from Sysmaster without using any quintums, from my research, Sysmaster GWs are a lot more functional Quintum, granted, they may be new on the block.
21st April 2003 at 21:44 #23683devaGuestwe have a few sysmaster in our basement. anyone interested? Cisco is good but Quintum is the only way to go. we have IVR over IP working and working great. Bob needs to wake up and smell the coffee.
31st May 2003 at 17:16 #23684hosseinGuesthi i have question about tenor a800 how to active supervision to time billing to sence active voice
2nd June 2003 at 18:57 #23685DennisGuestI have a Quintum Tenor 8 lines but I don´t have more than the installation docs, I will like to have configuration manuals to be able to use them, if anyone have this manuals I will greatful if sent to dengamvi@hotmail.com
2nd June 2003 at 22:57 #23686noname to DennisGuestI have the whole CLI manual (250 pages).
I will be e-mailing it to you in few hours.
3rd June 2003 at 00:05 #23687Dennis to nonameGuestGreat, I been looking for different configuration examples on box to box and box to gateway, but have been hard.
7th June 2003 at 17:13 #23688AssanjieGuesti have a problem with quintum anologue when i try to conect to a Cisco 5300 call dropes after eactly 30 seconds . can anybody help me to resolve this prblem
thanks
9th June 2003 at 13:32 #23689nonameGuestAssanjie:
Seems to run in the family. I am having the same trouble with a Quintum A200 calling to a Cisco gateway. Calls get dropped on the mark after 37-38 seconds.
Have you fond anything yet????
Thanks for any information!!!10th June 2003 at 00:25 #23690RadiumGuestThat sounds like a keep-alive issue. What protocol are you using to talk to the Cisco gateway? H323, MGCP, or SIP? Also, what codec are using, G. 711 or G. 729?
If this is a H323 gateway, most likely the issue is something to do with the H. 225 portion of the H. 323 protocol. The H. 225 portion of the protocol handles the call control portion. So I would recommend running at H. 225 debug on the gateway.
debug h225 events
Using this debug command, you will see the Q. 931 protocol messages going between the two gateways and this may provide you with a clue on what your issue is. Also remember on Cisco voice over IP gateways you should check the Cisco web site for any bug related issues with the IOS code you are running on your gateway. There gateway can support it I recommend running at least 12.2.13T code or better for the best performance. Cisco’s 12.2.13T code introduces some new features such as enhanced echo cancellation and echo suppression.
Another two things that would check is make sure your codec negotiation is correct and your IP routing is configured correctly. A lot of voice-over-IP issues starts as simple data connectivity issues. The majority of one way or no way voice issues are a result of simple connectivity problems.
17th June 2003 at 06:24 #23691JoaquinGuestI will like to have configuration manuals: “CLI manual” (250 pages)(configuration of the Tenor A400), if anyone have this manuals I will greatful if sent to jlouzao@adinet.com.uy
18th June 2003 at 07:26 #23692joeGuestI bought 2 quintum A800
I would like to do about prepaid card .
I try to config but fail :(((
I have manual .if someone want please tell me
I will uplaod to ftp server
thx so much
PS : if anyone success about prepaid card with quintum please tell me : p21st June 2003 at 21:13 #23693Ehsan to VasilGuestHi Sir
I also have a Quitum-a800 , and don’t have any documents for it , please advise .
Ehsan Karimi Eskandary
Eskandary@yahoo.com21st June 2003 at 21:36 #23694ehsan to nonameGuest25th June 2003 at 05:16 #23695AlbertoGuestFor all of us looking for A800 documentation, in the link below you can find the entire CLI (Command Line Interface) docs. Is a PDF file with 222 pages.
ALMOST anything you need to configure your Quintum Tenor A800. Good luck!25th June 2003 at 12:03 #23696Alex BlancGuestHi Vasil,
i am considering using the quintum for voip.
How do i find service providers with compatible gateways -
AuthorPosts
- The forum ‘Voice over IP’ is closed to new topics and replies.