Generic selectors
Exact matches only
Search in title
Search in content

Integration with PBX

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #23292 Reply

    I am working on a VoIP solution. I have 2 offices using Ericsson PBXs with 10 lines coming in from the PSTN and 100 extensions at each location. I intend to use Cisco 1761V. What I need help in is how many FXO modules I need to use on the router.
    I would appreciate if any one could help me out on this.


    #23293 Reply
    Morgan de Ruiter

    It depense on what type of Ericsson you have. Is it a MD110?
    Try te get hold of a IP card will make your live simple.
    You could also do this with the S0 bus. enable 2 of them on each site and connect them with 2 BRI Vwic card. This way you can also use compression.
    If you use FXO cards than you will have to use for every line 1 FXO card. That meens that you need a big router to make it happen.

Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: Reply #23293 in Integration with PBX
Your information:

<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">