[Begra8fl]

Hi Jeff and everyone
I’m new to VoIP. Please can you share you thought and experience with me on the configuring a Tenor A800 on a private LAN over cable modem. I have a Linsys Router on the network. Thanks

[Jessie]

Hi guy. Im am currently configuring a quintum d3200. The setup is for outgoing, can anybody help me how am going to configure it? Please give me a step by step configuration. Thank you.

[Andrey]

I must to connect two quintums a800 with wireless equipment between them (on pbx side)!
I need to do it fast in my office, and connect two telephones on pstn side of the quintum so they can talk between them , without any other equipment.
Please help me fast !!!!!
Thank you !!!!

[Matt]

I have experience configuring Quintum boxes. I can help you out. You can reach me at my email address.

[don]

jeff describe how you made the connection of A400/800 using private IP (192.168.xxx.xxx) Im trying to make the same on A800 but incomming calls are being lost. Outgoing no problem.

[kolawole]

Please,I hope someone could help me out of this.I have a quintum A400 working fine but there is a change in my network connection which has affected the service.I have try to change the Ip address it was so difficult to respond despite i have the manual with me.
Please, help

[Matt]

I’ve got Quintum Experience. You can email me if you need you question answered. Mattg@telcomproducts.com

[Kolawole]

I got it working after several attempt.

[Andrey]

Matt hi!
Did you got my email?

[Shanker]

Hi ,
Can anyone send me the commands to configure A800 Tenor as the manual is not helpful.

[casraou]

hi dears
pls i need helpCan anyone send me the commands to configure A800 Tenor as the manual is not helpful.

[kasraou]

Can anyone send me the commands to configure A800 Tenor as the manual is not helpful.
and how connect between tenor a800 and sesco 1v50 and datum 4900 l

regards

[Andrey]

Hy
Anybody know why qa800 drops the call ? four qa800 goes to qd800,
1 to 8 seccsesuful calls.
I cant figure it .

[Jessie]

Hi Matt. I beleive you have an experience in Quintum configuration,I am currently configuring a quintum d3200. The setup is for outgoing, can anybody help me how am going to configure it? Please give me a step by step configuration. Thank you.

[Serguey]

Im configured everything on the Quintun Tenor A200, and after rebooting it couldn’t start up.
How can i rest it to factory default?
There is start up message:

Internet Telephony Gateway ( Include FirstAid code)
Hardware Version : 1.02
Boot Code Version : 1.03
LAN Port MAC Address : 00.30.e1.50.0b.6e
WAN Port MAC Address : 00.30.e1.50.0b.6f

RTL8019 NIC command Register write test — OK
RTL8019 MAC Loopback Test — OK
NW1034 register Read/Write test — OK
AudioCode_0 HPI register test — OK
AudioCode_0 Memory Test — OK
AudioCode_1 HPI register test — OK
AudioCode_1 Memory Test — OK

AudioCodes Kernel code software version
Name: Ac48302ck-S Ver : 1.26 Date:1/24/2001

AudioCodes Program code software version
Name: Ac48302ce3-S Ver : 1.41 Date:5/14/2002
Press ENTER to get in POST console within 3 seconds.
…………………………………………………………
Normal code checksum ok

Starting system

Кre
AudioCodes
** Trap : Data Abort Handler
Data Abort Instruction Address: 0x10f9ff4
Data Abort Task: H323App
reash Write OK!!!
AudioCodes
** Trap : Data Abort Handler
Data Abort Instruction Address: 0x10f9ff4
Data Abort Task: H323App
reash Write OK!!!
AudioCodes
** Trap : Data Abort Handler
Data Abort Instruction Address: 0x10f9ff4
Data Abort Task: H323App
reash Write OK!!!
AudioCodes
** Trap : Data Abort Handler
Data Abort Instruction Address: 0x10f9ff4
Data Abort Task: H323App
reash Write OK!!!
AudioCodes
** Trap : Data Abort Handler
Data Abort Instruction Address: 0x10f9ff4
Data Abort Task: H323App

[Author]

Posts