- This topic has 204 replies, 1 voice, and was last updated 15 years, 9 months ago by
Rabin Manandhar.
-
AuthorPosts
-
7th July 2003 at 14:09 #22970
Begra8fl
GuestHi Jeff and everyone
I’m new to VoIP. Please can you share you thought and experience with me on the configuring a Tenor A800 on a private LAN over cable modem. I have a Linsys Router on the network. Thanks15th July 2003 at 04:16 #22971Jessie
GuestHi guy. Im am currently configuring a quintum d3200. The setup is for outgoing, can anybody help me how am going to configure it? Please give me a step by step configuration. Thank you.
19th July 2003 at 11:14 #22972Andrey
GuestI must to connect two quintums a800 with wireless equipment between them (on pbx side)!
I need to do it fast in my office, and connect two telephones on pstn side of the quintum so they can talk between them , without any other equipment.
Please help me fast !!!!!
Thank you !!!!21st July 2003 at 15:23 #22973Matt
GuestI have experience configuring Quintum boxes. I can help you out. You can reach me at my email address.
21st July 2003 at 15:26 #22974don
Guestjeff describe how you made the connection of A400/800 using private IP (192.168.xxx.xxx) Im trying to make the same on A800 but incomming calls are being lost. Outgoing no problem.
24th July 2003 at 10:17 #22975kolawole
GuestPlease,I hope someone could help me out of this.I have a quintum A400 working fine but there is a change in my network connection which has affected the service.I have try to change the Ip address it was so difficult to respond despite i have the manual with me.
Please, help25th July 2003 at 14:05 #22976Matt
GuestI’ve got Quintum Experience. You can email me if you need you question answered. Mattg@telcomproducts.com
26th July 2003 at 19:12 #22977Kolawole
GuestI got it working after several attempt.
27th July 2003 at 05:59 #22978Andrey
GuestMatt hi!
Did you got my email?30th July 2003 at 21:29 #22979Shanker
GuestHi ,
Can anyone send me the commands to configure A800 Tenor as the manual is not helpful.1st August 2003 at 22:18 #22980casraou
Guesthi dears
pls i need helpCan anyone send me the commands to configure A800 Tenor as the manual is not helpful.1st August 2003 at 22:38 #22981kasraou
GuestCan anyone send me the commands to configure A800 Tenor as the manual is not helpful.
and how connect between tenor a800 and sesco 1v50 and datum 4900 lregards
5th August 2003 at 12:54 #22982Andrey
GuestHy
Anybody know why qa800 drops the call ? four qa800 goes to qd800,
1 to 8 seccsesuful calls.
I cant figure it .6th August 2003 at 02:22 #22983Jessie
GuestHi Matt. I beleive you have an experience in Quintum configuration,I am currently configuring a quintum d3200. The setup is for outgoing, can anybody help me how am going to configure it? Please give me a step by step configuration. Thank you.
11th September 2003 at 16:06 #22984Serguey
GuestIm configured everything on the Quintun Tenor A200, and after rebooting it couldn’t start up.
How can i rest it to factory default?
There is start up message:Internet Telephony Gateway ( Include FirstAid code)
Hardware Version : 1.02
Boot Code Version : 1.03
LAN Port MAC Address : 00.30.e1.50.0b.6e
WAN Port MAC Address : 00.30.e1.50.0b.6fRTL8019 NIC command Register write test — OK
RTL8019 MAC Loopback Test — OK
NW1034 register Read/Write test — OK
AudioCode_0 HPI register test — OK
AudioCode_0 Memory Test — OK
AudioCode_1 HPI register test — OK
AudioCode_1 Memory Test — OKAudioCodes Kernel code software version
Name: Ac48302ck-S Ver : 1.26 Date:1/24/2001AudioCodes Program code software version
Name: Ac48302ce3-S Ver : 1.41 Date:5/14/2002
Press ENTER to get in POST console within 3 seconds.
…………………………………………………………
Normal code checksum okStarting system
Кre
AudioCodes
** Trap : Data Abort Handler
Data Abort Instruction Address: 0x10f9ff4
Data Abort Task: H323App
reash Write OK!!!
AudioCodes
** Trap : Data Abort Handler
Data Abort Instruction Address: 0x10f9ff4
Data Abort Task: H323App
reash Write OK!!!
AudioCodes
** Trap : Data Abort Handler
Data Abort Instruction Address: 0x10f9ff4
Data Abort Task: H323App
reash Write OK!!!
AudioCodes
** Trap : Data Abort Handler
Data Abort Instruction Address: 0x10f9ff4
Data Abort Task: H323App
reash Write OK!!!
AudioCodes
** Trap : Data Abort Handler
Data Abort Instruction Address: 0x10f9ff4
Data Abort Task: H323App -
AuthorPosts
- The forum ‘Voice over IP’ is closed to new topics and replies.