- This topic has 33 replies, 1 voice, and was last updated 18 years, 7 months ago by eligijus.
11th March 2002 at 06:16 #21115JOSE QUINTEROGuest
There is a solution to connect Media Gateway to a MPLS Network, in this case you do not need VoIP, you will have VoMPLS.
JIQ12th March 2002 at 10:33 #21116EduardoGuest
JIQ : Did you get my mail ?
Im currently studding the use of MPLS in 3G (UMTS). Current 3G standards are based on ATM, but thoughts on evolving to a IP/MPLS-based network infastructure is discussed.
Since ATM is used from the BTS (Base Tranciver Station) to the GGSN (Gateway GPRS Service Node), it might be possible in the future when/if MPLS coexist with ATM (or maybe it will just be IP/MPLS 🙂 that VoMPLS could be utilize in UMTS?
( and this im not sure about : but if they’re gonna use VoATM, they surely can utilize VoMPLS also ? Just thoughts for me to work on… comments would be helpful 🙂
EP9th April 2002 at 14:39 #21117hengeGuest
how are you?
I’m a doctor student in china, now i am studying MPLS,especially about Vompls, but I have few sources about vompls, i saw your discuss, so i want to get your help,can you email some sources about it? Thank you very much!16th April 2002 at 16:47 #21118boubkerGuest
i’m morrocan student? i’m working in the same project as you: i’m studding the possibility of the use off voip over mpls as a solution for transport of voice in the core network! i have some docs related to that, but it’s not enough! so if you want that i share what i have, with you .
just write me to my @mail: email@example.com
regards.19th April 2002 at 12:53 #21119BipinGuest
What I make from the discussion is that not many ppl know about the two things or may be at least there is much ignorance about the relation between the two topics.
I have been tracking the subject for quite sometime, but lately the VoMPLS is not getting to pick up or may be is delayed for the time being. Even the MEGACO mailing list is confused and skeptical about the issue.
There is one internet draft if anyone is interested can go through it draft-kankkunen-vompls-fw-01.txt.txt but if there are any specific query’s may be i can try to answer.
BT19th April 2002 at 12:58 #21120WebmasterGuest
That address doesn’t work for me. Are you sure it’s right?20th April 2002 at 18:46 #21121BipinGuest
Its not an address its an internet draft, u need to search for it on net, may be u can find it on the megaco work group on ietf2nd May 2002 at 11:29 #21122HaraldGuest
Do you think the RQP with RX3 node will make VOIP faster if we are behind the T3 lines?
Harald2nd May 2002 at 14:47 #21123EduardoGuest
If you have an email addr. Ill se what i can do… 🙂3rd May 2002 at 09:08 #21124BipinGuest
Email id is firstname.lastname@example.org May 2002 at 15:24 #21125hengeGuest
my email is email@example.com
Thank you very much!18th May 2002 at 04:40 #21126RobertGuest
I am doing surveys of from VoIP to VoMPLS, and it’s appreciated if any advise is given.
my email is firstname.lastname@example.org
Thank you very much!6th June 2002 at 15:18 #21127Hristo StoevGuest
Hellow, I’m searching an explicit publication about VoIP, including explanation of specific abbreviations and working principles of hardware. If someone has something suitable, he may send me info to my e-mail, listed below. Thanks a lot.11th June 2002 at 04:01 #21128makkaGuest
From last one month I am trying to figure out the scenario intergarting VOIP and MPLS to choose the topic for my graduate project. Can anybody give me right suggesstion from where I should begin, I mean some scenarios ?12th June 2002 at 05:59 #21129Bipin TomarGuest
For integrating VoIP with MPLS a good place to start off is draft-kankkunen-vompls-fw-01.txt.
HOwever there could be many differnt scenarios for using MPLS for VoIP. Try eploring the differnt VoIP architectures (TIPHON etc.).