Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

ZTE Batch commands execution

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • 5th May 2013 at 09:51 #69031
    Dan
    Guest

    Hi all, In ZTE Netnumen u31 we are not able to execute a series of commands(batch) ,whereas single command execution works. Help!

    7th May 2013 at 13:35 #69032
    Tanuj
    Guest

    Hi Dan

    In our ZTE iBSC Netnumen, we were not able to run batch commands but we were successful in running batch commands in ISMG.

    Regards
    Tanuj

    26th May 2013 at 15:02 #69033
    Dan
    Guest

    Thanks Tanuj!!!

    2nd June 2013 at 02:08 #69034
    Dan
    Guest

    Tanuj, in ZTE the MML command SYN BTS, the input parameters SubN/W ID and Managed Element ID, on execution whether it will sync the entire BSC or is it equivalent to “Sync modified data”

    3rd June 2013 at 18:42 #69035
    Tanuj
    Guest

    Hi Dan

    Its equivalent to Sync All Data.

    Regards
    Tanuj

    4th June 2013 at 04:13 #69036
    Dan
    Guest

    Tanuj, Thanks!How to sync modified data thru MML ?

    4th June 2013 at 13:16 #69037
    Tanuj
    Guest

    Hi Dan

    Its the same command only, it will sync the modified data too.

    Regards
    Tanuj

    24th November 2013 at 14:51 #69038
    Rajan
    Guest

    Please try this. Use the NE name as shown in MML.

    eg. SET AMO:Name=MSCS-1;
    SET:NEID=21;
    after that cmd…

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.