- This topic is empty.
29th March 2013 at 12:41 #68983ahmadGuest
can any body help in solving high number of radio link setup failures over Iur in our ZTE network , it’s sudenly incremented with attempts also. i check all the utran NBR’s relation & external utran cell definition n found ok , the problem appeared on more than one cell in all RNC’s @ same time/day.
thanks30th March 2013 at 12:24 #68984pixGuest
it’s probably due to iur failure rather than neighbour definitions. Check the IUR logical conf, do some testings…
pix4th April 2013 at 20:44 #68985rozeGuest
pix , what did you mean by IUR Logical configurations, please be more specific , because we face the same issue in our ZTE network in jordan.
BR5th April 2013 at 18:53 #68986pixGuest
your RNC is connected to the other RNC thanks to an Iur link.
This Iur link has to be configured within each RNC :
– in RNC A : Iur from RNC A to RNC B
– in RNC B : from RNC B to RNC A
Typically, the iur’s configuration is defined on several layers (L1, L2, L3 (atm or ip) ), with correct addressings.
Then there are some radio parameters associated to Iur’s.
Then you define some external cells on those Iur links.
And then you define 3G-3G external relations that points to those external cells.
cheers14th April 2013 at 17:20 #68987XiaoMuGuest
As I remember some call setup timers must be extended (prolonged) after u setup Iur Interface…just try to check ur call (RRC Connection ) paramaters n play with different related timers…..m pretty sure it can be fixed this way ….Hope that helps ( feed me back)6th January 2014 at 14:04 #68988PkGuest
Can any one help me by providing step by step procedure for ericsson 3810 RNC integration on ATM platform…