Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

MAXPDCHNUM

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #68338
    Agha
    Guest

    Dear All,
    please help me to understand below parameter.
    1).MAXPDCHNUM (Maximum number of PDCHs that can be assigned in the
    TRX), Either it is included both statis PDCH or Dynamic or any one? its recommended value is 8, if i set to “0” so what does it mean?

    Equipment is Huawei.
    Thanks in Advance.

    #68339
    pix
    Guest

    hi, i don’t know Huawei specifically, but i’m pretty sure that MAXPDCHNUM is the number of dynamic PDCH.
    The number of static PDCH should be MINPDCHNUM, or something equivalent.

    Fortunately for us, Huawei is not well known for their fresh approach on wireless…

    cheers
    pix

    #68340
    Agha
    Guest

    Thanks PIX for ur prompt response.

    One more Question plz.

    If a TRX is configured with several static PDCHs, it is recommended that the static PDCHs be configured in the sequence of timeslot numbers 6, 5, 7, 4, 3, 2, 1, and 0.

    We normally have static PDCH on TRX in order of channel number 4,5 & 6.
    so What’s the difference if PDCH is defined in order of 5,6,7 & 6,5,7?

    #68341
    rkc
    Guest

    hi Agha

    there are 3 gprs territories:

    dedicated/static: dedicated to gprs and cannot be taken by voice.

    default : u can say it to be dynamic since this territory can be taken by voice if the need be

    max gprs territory: this is the dynamic territory which is usually 100% …means all the TCHs on the GPRS enabled TRXs can be used for gprs upgrades if there is no voice.

    this is the concept. U can co-relate it with any vendor ..terms/jargon may be different.

    Yes- it is recommended to define the dedicated/static time slots in continuous sequence say 8,7,6,5,4,3,2,1

    rkc

    #68342
    pix
    Guest

    com’on agha..! obviously:

    5 6 7 = 5 7 6 = 6 5 7

    it doesnt matter

    #68343
    Agha
    Guest

    Thanks PIX/RKC
    yes, but i found some anomaly in some doc,for this specific order so ask just for confirmation.

Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.