Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

RTCH Allocation Prefer Bad TRX

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #67458

    Hi PIX,

    Why is it in ALU, Say we have TRX1,2,3,4. Once TRX 3 is bad or say 2, most allocations begins with this trx and this is really bad even when trx 4 is good.

    NO Pref marks are set. ALU B10


    Hi Segs,

    There are more allocations on TRX3 (in your example), because there is a statistical effect. The allocations do start on TRX4, as before the problem. Let me explain:
    If, before the problem, tch allocations split was:
    trx1 = 100
    trx2 = 300
    trx3 = 400
    trx4 = 400

    after the problem, the TCH that are established in trx3 are dropped almost immediately. Therefore trx2 and trx1 are not geting their share anymore, the allocations are stuck in trx3:

    trx1 = 0
    trx2 = 0
    trx3 = 1000
    trx4 = 400

    On top of that, the people are trying to make a new call if the 1st one was dropped quickly.


Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.