Generic selectors
Exact matches only
Search in title
Search in content

Huawei Egprs only MCS2

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #65209 Reply
    NJ
    Guest

    Hi all,
    Why on one site DL/UL TBF never exceed MCS2 even all configuration are the same like other sites which attempt MCS9?
    Vendor: Huawei, BTS312 with RETR, supported GPRS and EDGE.

    Thanks for all support.

    #65210 Reply
    Huawei_ROPT
    Guest

    Maybe there is no Idle Time Slot in Abis for this site.

    If no any Idle Timeslot configured, you can have only CS1-CS2, MCS1-MCS2 not more

    #65211 Reply
    NJ
    Guest

    Hi Huawei_ROPT,

    Site config is 8/8/8 with two Racks BTS 312, 3E1s, Two TMUs for the main rack. Idle TS are now 88.
    When I check on PCU side with hyper terminal it seems that there is no enough TS allocated (UL:0x02, DL: 0x0f)

    any idea?
    Regards

Viewing 3 posts - 1 through 3 (of 3 total)
Reply To: Reply #65210 in Huawei Egprs only MCS2
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">