Generic selectors
Exact matches only
Search in title
Search in content

How to do Planning ( BSIC, HSN, MAIO) ?

  • This topic is empty.
Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #64942 Reply
    Sarada Prasanna
    Guest

    What are the criterias to follow during he planning of BSIC, HSN & MAIO?

    Can we plan same BSIC in all sectors in same BTS?

    More informations are always invited.

    Thanks in advance

    #64943 Reply
    Brother
    Guest

    BSIC is to differantiate bcch’s, so dont give bcch-bsic combination if possible(or give to cells far)

    if u have a common MA list(1×1 or 1×3 sfh case) dont give same hsn to close sites and to cells of a site give same hsn’s

    MAIO depends on ur trx number and hopping model(u will find lots of topics about this in the forum)

    #64944 Reply
    Sarada Prasanna
    Guest

    Dear Brother,

    In my network I am having the following structures.

    Please let me know what are the Basic DO’s & DONT’s.
    We are using Motorola System.

    BCCH-> 99 to 111

    TCH 900-> 81 to 98

    TCH 1800-> 736 to 757, 828 to837

    BSIC-> 20 to 27 & 40 to 47.

    Thanks in Advance..

    #64945 Reply
    Alex_R
    Guest

    you can map HSN to BSIC if you use BBH

    Example

    BSIC = 5 , HSN = 5
    BSIC = 11, HSN = 9

    #64946 Reply
    Paul
    Guest

    Here is what I experienced :

    1.In FLP :
    a. Same BSIC in 1 BTS (3 sectors) with different BCCH each sector is OK
    b. Same BSIC & BCCH in nearby cells is not OK even though both cells are separated with far distance (3-4 kms), it will cause High interference
    c. Same BSIC with different cells is OK as far as interference by co-channel doesn’t happen
    d. Same HSN, same MAIO & MALIST in nearby cells (usually happens at the same antenna’s direction) is not OK ( if those nearby cells are separated by far distance, exg 5 km, it’s ok, but may be with low interference, you should check it by drive test) it will cause High interference (Change HSN, then it’s cleared)

    2.In BBH:
    a. Remember that in BCCH, each sector of a BTS or with nearby cells is designed with different frequency channel, so HSN and BSIC do not significantly affect the interference. In BBH, interference is triggered with the same frequency channel.

    Regards,

    Paul

    #64947 Reply
    rafaralahy
    Guest

    Yes my friend, in my advice,you can plan same bsic in all sectors in same BTS.

    #64948 Reply
    Dinesh
    Guest

    As long as the BCCH are different we can set same BSIC. But nearby cells having same BCCH should be given different BSIC so that the BCCH of different cells could be differentiated.
    For MAIO and HSN, it is better to give same HSN with different MAIOs for the cells in a BTS. It will reduce interference

Viewing 7 posts - 1 through 7 (of 7 total)
Reply To: Reply #64947 in How to do Planning ( BSIC, HSN, MAIO) ?
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">