Generic selectors
Exact matches only
Search in title
Search in content

Frequency Hopping

Viewing 4 posts - 16 through 19 (of 19 total)
  • Author
    Posts
  • #64630 Reply
    DangerousMinds
    Guest

    Yeah, I am going to do that, thanks.

    We are using SFH, so we do not have to set HSN2, right?

    #64631 Reply
    Rex
    Guest

    Hi DangerousMinds,
    in SFH you should set HSN. Cells which belongs to one site will have the same HSN. Cells of different sites will have different HSNs.
    Regards,

    #64632 Reply
    bjushka
    Guest

    Hi DangerousMinds,

    In SFH, only HSN-1 is meaningful, so yes you dont have to set HSN-2.

    BR

    #64633 Reply
    bjushka
    Guest

    Hi DangerousMinds,

    I think that the problems is on parameters of RF hopping.

    You have set MAIO step = 1 and this cause interference problems, because you are using adjacent hopping frequencies for the TRX-s of the same cell.

    Are you using more than one hopping trx per cell? if yes then MAIO step should equal or greater than 2.

    With the MAIO Step parameter you can use successive channel numbers within a
    single cell. For example, with step value ‘2’ 400kHz channel separation is achieved.

    Hope I could help

    bjushka

Viewing 4 posts - 16 through 19 (of 19 total)
Reply To: Frequency Hopping
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">