Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Finding TCH During Drive test

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
  • #64441

    Hi guys

    i just want your help in drive test using TEMs Inv.
    when i make drive test, how can i know the tch Freq?
    and wat is the difference between TRX Freq. and TCH Freq??

    thanks in advance


    you need to open “current channel” window


    TCH freq is the BCCH frequency.
    TRX freq is the assigned trx freq or the hopping freq if u use hopping


    Dear Brother

    As i know Current Channel will show you the BCCH Freq.

    i want the TCH Freq, and how can i find it


    Sos@ as Brother wrote you may find what you want in current channel

    Eagle@ TCH freq is not BCCH freq! If you mean that sometimes TCH ARFCN and BCCH ARFCN seem same in current channel, it means your speaking on BCCH TRX(or let’s say main TRX)

    As you know, TRX has 8 slots. ANd you may define first slot for BCCH, second for SDCCH (or you may combine BCCH and SDCCH). you can define dynamic or static PDCH and remaining ones are TCH. So TRX freq inclued BCCH and TCH for main TRX. For others TRX freqs= TCH freqs.

    If you wanna see if TCH freqs have interference problem you may check freqs in Hopping Channels. When you open it you will see your tch freqs and their C/I values.

    I expect you got your answer.


Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.