Generic selectors
Exact matches only
Search in title
Search in content

ZTE-Rx Quality DL

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #64179 Reply
    Suzane
    Guest

    Hi ZTE Experts,

    Observing RxQuality for 60% of cells in My Network is below 96% RxQual DL

    Checked:HSN,MAIO- We are using 1×1 MAL with 18 TCH & 12 BCCH for all the cells.

    Please help what could be the causes for so poor RxQual DL & what can be done

    #64180 Reply
    Suzane
    Guest

    Experts please guide on ZTE Parameters

    #64181 Reply
    Vikas Sehrawat
    Guest

    dear suzane make a drive test for 1 site and analyse the log file

    #64182 Reply
    Suzane
    Guest

    we have done that & in drive the quality is not so bad as reflecting in report

    #64183 Reply
    Vikas Sehrawat
    Guest

    then could be a prob with formula set

    #64184 Reply
    Arpan
    Guest

    Hi

    You can check the quality thresholds in Handover control and power control i.e. check at what threshold quality handover is being trigerred and at what quality threshold power is being increased or decreased.

    Also check HoMarginRxQual parameter in the neighbors. If it is 30 (6dB) then make it 28 (4dB) for all the neighbors.

Viewing 6 posts - 1 through 6 (of 6 total)
Reply To: ZTE-Rx Quality DL
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">