Generic selectors
Exact matches only
Search in title
Search in content
Search in posts
Search in pages

7606 – EXxx TRX module Tx power overdriv

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #63647 Reply
    Johan Martinez
    Guest

    Hi everybody, i need your help with the alarm 7606 – EXxx TRX module Tx power overdriven at DPC.

    this is new for us, we are using EP.2 CD 2 Sw version and trx EXTB or EXPB before we were using EXTA or EXPA. i had made the troubleshooting changing the BCCH to other TRX ang replacing the TRX for a new one but the alarm stills.

    i was thinking that this alarm was caused by the SW version, now i get the EP2 CD 3 then tomorrow im going to commisioning with this SW but i dont know how to proceed with this alarm. >Can anybody help me? Thanks

    #63648 Reply
    Johan Martinez
    Guest

    this is a Nokia Flexi BTS Alarm

    #63649 Reply
    Diego M
    Guest

    Change SW, i think you have changed Power Parameters in that sector for example PMAX, with that SW the first TRX gets faulty with that alarm “…overdriven at dpc”..change SW.

    #63650 Reply
    RAKESH SHAH
    Guest

    JUST CHECK FIRST ZEUO:BTS=BTS NO; IN THAT CHECK PMAX1 AND PMAX2 VALUE IT MUST BE ZERO IF IT IS NOT THEN CHANGE BOTH THE VALUE TO ZERO BY ZEUG COMMAND TO ZERO. THEN LOGIN INTO BTS MANAGER AND GIVE ESMA RESET BY CLICK ON THE ESMA.

Viewing 4 posts - 1 through 4 (of 4 total)
Reply To: 7606 – EXxx TRX module Tx power overdriv
Your information:




<a href="" title="" rel="" target=""> <blockquote cite=""> <code> <pre class=""> <em> <strong> <del datetime="" cite=""> <ins datetime="" cite=""> <ul> <ol start=""> <li> <img src="" border="" alt="" height="" width="">