Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

• This topic has 2 replies, 1 voice, and was last updated 14 years ago by SAM.
Viewing 3 posts - 1 through 3 (of 3 total)
• Author
Posts
• #62981
SAM
Guest

Hi

Assume that I have 2 MAIO group.G-1 0-33 & G-2 0-32 for CH725 to CH791

Configuration S777
Example-1
Cell A: HSN 1 MAIO=G-1(0,2,4,6,8,10)
Cell B: HSN 1 MAIO=G-1(12,14,16,18,20,22)
Cell C: HSN 1 MAIO=G-2(1)G-1(24,26,28,30,32)
And
Example-2
Cell A: HSN 1 MAIO=G-1(0,2,4,6,8,10)
Cell B: HSN 1 MAIO=G-1(12,14,16,18,20,22)
Cell C: HSN 2 MAIO=G-2(1)G-1(24,26,28,30,32)

Question:

Thanks.

#62982
pix
Guest

hi,

i don’t understand your 2 examples… G-1, G-2 ???

the MAIO is not used to compute the rf load.

HSN1 = 34 frequencies
7 TRX over 34 frequencies = 7/34 = 20.5%

limit is 12% to 16%, so that’s way over the limit, unless not all TRX are used at busy hour.

cheers
pix

#62983
SAM
Guest

Dear pix,
Thanks for reply.G-1 is frequency group-1(ARFCN 725 to 757)and G-2 is frequency group2(ARFCN 758 to 791). For 2*2 from my example1 as i am using cell C:HSN1 MAIO:1 from frequency group2 and in example2 using cell C: HSN:2 MAIO:1 from frequency group2 along with other MAIO from frequency group1. Now what will be the calculated RF Load for frequency group1&2 according to examole1&2? For calculation what will be the number of frequency? is it 34+33=67 as i am using both the frequency group? what will be the impact for using same or different HSN on load calculation?

Thanks

Viewing 3 posts - 1 through 3 (of 3 total)
• The forum ‘Telecom Design’ is closed to new topics and replies.