[Mostafa]

Hendy:

can u tell me exactly what do u need to know about 2202?

[imanudin]

Anybody knows what’s the meaning of these : LAC Boundaries, SDCCH overhead, Inter BSC handover and signalling, inter MSC handover and signalling, BTS and BSC Reparenting, Transmission E1 Routers, Pooled and dedicated transcoders as well as PCU allocation.

And how to do it in MSC/BSC ?

[sunilkumar]

Hi abt POOLED TRANSACODER.

As per Ericsson BSC…

The transacoder is a separate unit.It has its own SOFTWARE and PROCESSOR ( Regional ) for the resource management.

It will be connectd to the Group Switching SYSTEM.Lets say..like…

AINTERFACE E1/PCMS—->GSS

[hendi]

hiii mostafa,
i need to know about the hardware in rbs 2202 (CDU,DXU,TRU,ECU,PSU)and how this hardware working, and if u have this article please sent on my e-mail hendi_kurnia@yahoo.com

[vivek]

Hello
I’m a newly joined BSS engg and seeing the site i came to know u all are really good professionals .Pls help me find info abt RBS2202 and MINILINK . I’m really confused abt some basic concepts abt them .Hope u’ll help me out .
My id id vivek_p@email.com
Thanks

[sonam]

hi,
i would like to know about the common fault and the most severe fault that occurs in the RBS2202 of Ericsson.Since the location of the installed RBS is always rainy and the lighthing strikes all on a sudden,i would like to know if there are anychances for equipment to damage and its necessary precaution in order to prevent the equipment from the lightning.

[Dumisani]

I need to know about the hardware in rbs 2202 (CDU,DXU,TRU,ECU,PSU)and how this hardware working, and if u have this article please sent on my e-mail du@tsamail.co.za

[Baba Hajiya]

Hi Engineers,

can someone help me out on details of sites reparenting (cutover) in ericsson systems.

[Baba Hajiya]

Hi Engineers,

can someone help me out on details of sites reparenting (cutover) in ericsson systems.

[nuralhassan]

can any tell me how we will do rbs commissioning

[Mostafa]

Hi nuralhassan,

1- Check VSWR for feeders.
2-Load OMT in the DXC
(OMT= Nbre of sectors + Nbre of TRXs + Nbreof cabinets +Type of RBS + Type of combiner + external alarms)
3-Configure transmission in DXC (if installed in RBS)=Nbre of TSs for the site.
4-Do drive tests when the site is up.

[nam vo hoang]

Hi All
Please tell me the way to connect to a remote Minilink network by using a modem with the phone line

[sachin mahajan]

hi all
i want to know about the hardware and working of rbs 2202,minilink

my emailid is
electronsach@rediffmail.com
regards
sachin

[emre igrek]

hello i want detailed documents for rbs 2206 and 3g supported rbs versions

turkey

[emre igrek]

my e-mail emreigrek@hotmail.com

[Author]

Posts